Table of Contents
Advertisement
6. Features
PCI -Support
• up to five PCI-Masters, 32-bit/33 MHz according to PCI Specification v2.3 for:
- one PCI-Master on board: optional single MiniPCI connector, type IIIA; signaling 3.3 V (installed Mini PCI card
must be 5 V tolerant)
Hint for the optional MiniPCI connector: the additional USB signals on reserved pins for e. g. bluetooth
are not supported.
- up to four PCI-Masters routed to the PICMG 1.3 edge connector
Supports 5V PCI backplanes
• PCI Express routed to the PICMG 1.3 edge connector
- 4x PCIe x1 or 1x PCIe x4
- 1x PCIe x16
Real Time Clock (RTC)
Motorola MC146818B-compatible RTC with 256 bytes of battery-backed RAM
• RTC supports a date alarm that allows for scheduling a wake-up event up to 30 days in advance
• A coin-cell battery (CR2032) powers the real-time clock and CMOS memory
• A battery socket eases replacing empty batteries
• Battery backup time > 5 years
• Accuracy better than 50ppm (max. deviation 4s/24 hours) within the whole temperature range
BIOS
The BIOS is based on the AMI BIOS Core Release 8.00.14.
• 4 MB (32MBit), Flash BIOS-ROM connected to the SPI-Bus
• Upgradeable via Flash updating tool
• PXE-Boot
• Legacy USB Support including USB 2.0
• Support of Serial Ports (RS232, serial console redirection); COM2 configurable as RS422 and RS485
• Support of VGA (CRT)
• ACPI Support
• Hardware Monitoring
Power and System Management
• BIOS-support for CPU-Internal temperature-sensor/s
• Power management according to ACPI 3.0
• Three Fan controls, additional four FAN-Tacho inputs available on Hardware Monitor Connector
• Supports Full-on (S0), Suspend (S1), Suspend-To-RAM (S3), Suspend-To-Disk (S4) and Soft-Off (S5).
• Wake-up events
• Optional customized logo in boot-screen feature
12
PCI-760 – User's Manual (V1.00)
Advertisement
Table of Contents
