Kontron Embedded Computers PCI-760 User Manual page 46

10. AMI BIOS Configuration
Primary IDE Master / Primary IDE Slave
These fields call the submenu to make corresponding settings of the IDE devices.
You should change the default settings only if you are connecting an additional IDE drive (e.g. Hard disk
drive).
The description of the setting options for Primary IDE Master also applies to Primary IDE Slave
The default settings strongly depend on the installed drive .
These entries are specific for each installed device as:
• Primary IDE Master/Primary IDE Slave
• Secondary IDE Master/Secondary IDE Slave
• Third IDE Master/Third IDE Slave
• Fourth IDE Master/Fourth IDE Slave
The screens below are only an example for which entries could be available.
44 PCI-760 – User's Manual (V1.00)