Connectors Located On Slot Bracket - Kontron Embedded Computers PCI-760 User Manual

9. Jumpers and Connectors Overview

9.1.1. Connectors located on Slot Bracket

9.1.1.1. J29 and J30 USB Connectors
The slot bracket of the PCI-760 board provides two external USB 2.0/1.1 interfaces (USB6 and USB7). These
connectors allow connection of USB-compatible devices to the PCI-760 board (slot bracket).
Pin Signal Name
1 VCC, fused
2 Data-
3 Data+
4 GND
9.1.1.2. J36: VGA Connector
An external (analog) monitor can be plugged into this interface which is provided as a 15-pin D-SUB socket.
Pin Signal Name
1 Analog red output
2 Analog green output
3 Analog blue output
4 NC
5–8 GND
9 VCC, fused for DDC
10 GND
11 NC
12 SDA (DDC)
13 TTL HSync
14 TTL VSync
15 SCL (DDC)
18
2x USB
VGA
Fig. 5
Fig. 6: PCI-760 – Slot Interfaces
4-pin USB Socket
Type A Version 2.0/1.1
15-pin D-SUB Socket (female)
J36
LAN2
LAN1
PCI-760 – User's Manual (V1.00)