Ahci Configuration (Ahci Settings) - Kontron Embedded Computers PCI-760 User Manual

10. AMI BIOS Configuration

10.3.3. AHCI Configuration (AHCI Settings)

10.3.3.1. AHCI BIOS Support
In order to support the AHCI ( A dvanced H ost C ontroller I nterface) (referring to IDE Configuration/ Configure SATA#1
as/AHCI setting) this option must be set to Enabled . For detailed information refer to "Serial ATA AHCI 1.2 Specification".
Available settings: Enabled and Disabled .
10.3.3.2. AHCI Port0/ /AHCI Port5
These options display the detected SATA devices (if configured in IDE Configuration/ Configure SATA#1 as to AHCI).
Each SATA detected device (AHCI configured) allows following:
SATA #(1/ /5) with available settings : Auto and Not Installed.
S.M.A.R.T. with available settings: Enabled and Disabled .
48 PCI-760 – User's Manual (V1.00)