Table of Contents
Advertisement
10.6. Security
PCI-760 supports Supervisor and User password.
Valid password (Supervisor and User) can be a 1 to 6 alphanumeric characters combination.
If you are using both passwords the Supervisor password must be set first.
Keep a record of the new password when the password is changed. If you forget the password, you
must erase the system configuration information in NVRAM.
The system can be configured so that all users must enter a password every time the system boots or when BIOS Setup
is executed, using either or either the Supervisor password or User password.
The Supervisor and User passwords activate two different levels of password security.
If you select password support, you are prompted for a one to six character password. Type the password on the
keyboard. The password does not appear on the screen when typed. Make sure you write it down. If you forget it, you
must drain NVRAM and reconfigure.
10.6.1. Supervisor Password
This field indicates whether a supervisor password has been set.
If the password has been installed, Installed displays. If not, Not Installed displays.
10.6.2. User Password
This field indicates whether a user password has been set. If the password has been installed, Installed displays. If not,
Not Installed displays.
PCI-760 – User's Manual (V1.00)
10. AMI BIOS Configuration
69
Advertisement
Table of Contents
