Exit; Save Changes And Exit; Discard Changes And Exit; Discard Changes - Kontron Embedded Computers PCI-760 User Manual

10. AMI BIOS Configuration

10.8. Exit

10.8.1. Save Changes and Exit

This field saves the settings you have made and exits BIOS Setup.

10.8.2. Discard Changes and Exit

This field exits BIOS Setup without saving the new settings.

10.8.3. Discard Changes

This field resets all values to those that were active when the computer was turned on without exiting BIOS Setup.

10.8.4. Load Optimal Defaults

This option allows you to load the default values of your system configuration. These default settings (manufacturing
settings) are optimal and enable all high performance features.

10.8.5. Load Failsafe Defaults

By this option the system can reload all default settings, which are permanently stored in the BIOS-ROM.
These settings are not the optimized default settings (manufacturing defaults) for your system, but can be used, if after
changes, the system does not run reliably. The Fail-Safe settings are designed for maximum stability, but not maximum
performance.
PCI-760 – User's Manual (V1.00) 79