Home Id - AT&T U-verse User Manual

Advanced Features Setup
Turning the Keypad Backlighting ON (continued)
STEP 2. Enter 9 9 1 using the numeric keypad. The AT&T
long beep, indicating successful programming. The RF Remote Control then returns
to its normal state.
D. Home ID
Your RF Remote Control and USB Converter were paired at the Factory. In the event you are
receiving interference from another RF device, your RF Remote Control and USB Converter
allow you to create a new 'Home ID' using any number from 0000 to 9999. To change your

Home ID:

STEP 1. Press and hold the Pairing Button
Converter until the blue Power LED
The USB converter is now ready to be programmed.
key will give a long flash and a
on the USB
1
turns off.
2