AT&T U-verse User Manual

Setup using
Auto-Program
User Guide
Use this method to program your remote for TV or Audio
AT&T U-verse
device brands that do not appear in the popular manufacturer
chart. Before you get started, please be sure to remove the
TV Remote
protective battery strip and ensure the device to be programmed
is powered on and the audio volume can be heard.
Control
STEP 1:
Enter Program Mode – Point the
remote directly at the device you are
trying to control/program. Press the
menu and oK keys simultaneously
for three seconds until the PoWer
key flashes red twice to confirm that
you are in Program mode.
STEP 2:
Press the key associated with the
device – Refer to the illustration at
the right and press the key that relates
to TV or Audio device, depending on
what you are trying to control.
STEP 3:
Press and hold FAST FORWARD
key – While pointing the remote
at your device, press and hold down the
FASt ForWArD key and let go of the
key as soon as the device responds.
note: It may take a few minutes for the
device to respond.
note: When holding down the FASt ForWArD key,
the remote PoWer key will flash red once every three
seconds when it sends a code, to give the device time
to respond and for you to release the key.
STEP 4:
TV programming: Let go of the FASt ForWArD key
as soon as the TV turns off. Press the PoWer button
to turn the TV back on.
Audio device programming:
ForWArD key when the device mutes. Press mute
to unmute the device.
Use the volume keys to verify that the remote control is
controlling the volume. If it does not work properly,
repeat this process.
note: If TV programming is interrupted or inactive for
more than 10 seconds, the PoWer key will flash
one long red blink and exit programming mode. This
means the remote has returned to normal operation
without saving changes.
Get to know your
remote control
Power key
(AT&T U-verse
service)
Access the latest
on Demand
content
record TV
with one click
Go to
main
tV Audio
menu screen
Return to
previous
screen
Picture-in-
Picture
channel
browsing
Return to
live tV
Go to
Program
guide
mute TV volume
Edit text on
Search screen
Select video
source on TV
Let go of the FASt
Optional Advanced
Features
Setting Volume ControlS
note: Once programmed, the volume controls are automatically
Explore, Entertain
assigned to control your TV unless an audio device is programmed
and Interact with
into the remote control, which then sets the volume keys to control
u-verse Apps
the audio device. This process shows how the volume controls can
be set to control the volume and mute function of the device of
your choice.
Choose your
STEP 1:
favorite channels
and watch
Enter Program Mode
4 at once
the oK and menu keys simultaneously for
three seconds until the PoWer key flashes
Content red twice to confirm you are in program mode.
Navigation
STEP 2:
Press VOLUME UP
key. The PoWer key will blink red once and
Jump forward &
remote backlighting will remain on.
backward
in set increments
STEP 3:
Access the
Select the device you wish to use for
options
Volume Control
menu
press the key that is associated with the device
shortcuts
you wish to use for volume control. The
PoWer key will flash red twice if the Volume
control is set to TV or Audio Device, and four
On-screen
times if it's set to Set-Top-Box.
Navigation
Setting uP the PoWer Control
Program Details
note: By default the PoWer key will turn on and off the
View and
Receiver each time it is pressed. Once programmed, the Power
manage
Maco can also turn the TV and Audio Device on and off. Use the
DVR recordings
instructions below to change the sequence these devices are
Change
powered on and off.
Channels/
Page view within
STEP 1:
the Guide
Enter Program Mode
Return to the oK and menu keys simultaneously for
previous three seconds until the PoWer key flashes
live TV channel red twice to confirm you are in program mode.
STEP 2:
Numerical pad
Press POWER key
key. The PoWer key will blink once and the
remote backlighting will remain on.
STEP 3:
Access
Closed
Program the power on and off sequence
Caption
for your devices
menu
the right, press each key in the sequence you
wish to turn on and off when the PoWer
key is pressed. The PoWer key will flash red
Access Self
once for each device programmed.
Support
Application
STEP 4:
Press OK to save
the power control settings. The PoWer key
u-verse remote Control –
will flash red twice.
Advanced Features
• Assigning Volume Control
loW bAttery inDiCAtor
• Setting Back Lighting
• Restoring Factory Defaults
When the battery power is low, the PoWer key will flash 5 times
with each key-press.
turn oFF the KeyPAD
bACKlighting
By default, your remote control is set with the backlight on.
Here's how you can turn it OFF or back ON:
STEP 1:
Enter Program Mode
oK and menu keys simultaneously for
three seconds until the PoWer key flashes
red twice to confirm you are in program mode.
STEP 2:
– Press and hold
Enter 9 7 2
remote, type 9 7 2. The PoWer key will flash
four times to show backlighting is disabled. If you
repeat this process, backlight will be ENABLED
again and the PoWer key will flash twice.
note:
– Press the Volume uP
Power key will flash red for every key press.
Troubleshooting your
tV Audio Stb
remote control
– Using the chart to the right,
button on the remote control. If not, check that the batteries are
properly seated or if they need to be replaced.
and you may have better results.
flash red 5 times with each key-press. Note: the remote control
cannot be programmed when the battery power is low.
your remote using direct code entry" on the back of this guide.
– Press and hold
Need more help?
– Press the PoWer
tV Audio Stb
– Using the illustration to
From there you CAn:
• View help videos
• Chat online with a technician
• Easily find troubleshooting
– Press the oK key to save information and user guides
• Learn about the U-verse Easy
Remote App for iPhone or iPad
If that doesn't do it, give us a call at 800.288.2020 and ask for
"U-verse technical support. "
– Press and hold the
– Using the numeric keys on the
Even with backlighting disabled, the
Check that the PoWer key lights up when you press any
If one setup method does not work, try another method
When the battery power is low, the PoWer key will
If unable to setup using Auto-Search, please see "Program
From your mobile DeViCe
Scan the QR Code
Download and install the free
AT&T Code Scanner from your
mobile app store.
on your tV
• Press MENU on your remote
control. Select Help > Remote
Control Setup or
• Go to Channel 411 and Press
OK on your control, Select
Program Your Remote
on your ComPuter
• Go to att.com/uverseremote