Connections/Installation; Part Names And Functions - Denon DN-D9000 Operating Instructions Manual

CONNECTIONS/INSTALLATION

2
1. Turn off the POWER switch.
2. Connect the RCA pin cords between the DN-D9000
outputs and inputs of your mixer. Be sure MAIN
OUTs are main outputs and MONITOR OUTs are
outputs of Alpha-Track sound.
3. Connect included control cord to the REMOTE
connector on remote controller (RC-D90) tightly.
4. If your mixer has Fader Start function such as our
DENON DN-X800 or DN-X400, connect FADER 1, 2
jacks to the mixer using 3.5 mm stereo mini cord.
5. If you have a DENON DN-X800 mixer, you can use
the X-Effect function to control the Hot Starts,
Samplers and Brake from the crossfader to get
wide variety of operation. You may also trigger the
Alpha Track by connecting Fader Start 1, 2 to the
DN-X800 mixer using the 3.5 mm stereo mini cords.
Fig. 1: Fader start connections
CH3 Fader jack
MIC 1
DN-X800
PH1/LN1
0 10 ON/OFF MIN MAX DIGITAL1 LINE2
MAIN MIC GAIN
MIC POST
CH FADER START
-26dB +10dB ON/OFF -26dB +10dB
HI HI 10
8
6
-26dB +10dB -26dB +10dB
MID MID
4
2
0
-26dB LOW +10dB -26dB LOW +10dB
CROSS
3.5 mm stereo FADER
START A SAMP.
0 10 ON/OFF
AUX MIC
CROSSFADER H/S
CH FADER START CONTOUR BRAKE
X
mini cord
1 2 3
H/S 2 A
OFF 4
ON OFF
H/S 1
ASSIGN A
-TRACK HOT START -TRACK PLAY
RVS SAMP1 SAMP2 SAMPLER B EXIT/RELOOP
STOP
FLIP A 3 A 4 B EXIT/ CUE
RELOOP
CLR A3 A4 CUE
A 3/4 A/B TRIM
FLIP A 1 A 2 B EXIT/
RELOOP
CLR A1 A2 4 HOT START PITCH/VOL SPLICE
DN-D9000 A3 B A4 B
A1 B A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ. DRAG S.
m s BRAKE
m s f ECHO
MEMO DUMP
PROG RVS
CONT./SINGLE TIME MEMO PROGRAM PLATTER MODE
RELAY TOTAL TIME PRESET RANDOM ALL OFF
CUE
TAP
STUTTER PLAY/PAUSE AUTO
CD1
Fader jack
Fig. 2: X-Effect connections
CH1
Input jack
DN-X800 MIC 1
PH1/LN1
0 10 ON/OFF MIN MAX DIGITAL1 LINE2 MIN
MAIN MIC GAIN GAIN
MIC POST
CH FADER START
-26dB +10dB ON/OFF -26dB +10dB -26dB
HI HI 10 HI
8
6
-26dB +10dB -26dB +10dB -26dB
MID MID MID
4
2
0
-26dB +10dB -26dB +10dB -26dB
LOW LOW LOW
CROSS
FADER
START A SAMP.
0 10 ON/OFF
AUX MIC
CROSSFADER H/S
CH FADER START CONTOUR BRAKE
X
1 2 3
OFF 4 H/S 2 A
ON OFF
H/S 1
ASSIGN A
-TRACK HOT START -TRACK PLAY
SAMPLER PARAMETERS
RVS SAMP1 SAMP2 B EXIT/RELOOP
STOP
PUSH
EXIT/
FLIP A 3 A 4 B CUE
RELOOP
CLR A3 A4 CUE
A 3/4 A/B TRIM
EXIT/
FLIP A 1 A 2 B RELOOP
CLR A1 A2 4 HOT START PITCH/VOL SPLICE
A3 B A4 B
A1 B A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ. DRAG S.
m s BRAKE
DN-D9000
m s f ECHO
MEMO DUMP
PROG RVS
CONT./SINGLE TIME MEMO PROGRAM PLATTER MODE
RELAY TOTAL TIME PRESET RANDOM ALL OFF
CUE TAP
STUTTER PLAY/PAUSE AUTO
CD1 Output jack
The DN-D9000 is designed to be used horizontal. If
main unit is tilted, the DN-D9000 may not function
properly or disc may not be loaded or unloaded
property.
15°
DN-D9000
CH4 Fader jack
2 3 4
- 20 15 10 7 5 3 1 0 1 3 5 8 +
L
PH2/LN3 PH3/LN5 LINE7 CUE
R
PWR
PGM
- 20 15 10 7 5 3 1 0 1 3 5 8 +
MIN MAX DIGITAL2 LINE4 MIN MAX DIGITAL3 LINE6 MIN MAX DIGITAL4 LINE8
GAIN GAIN GAIN ZONE MASTER SUB WOOFER
CH FADER START CH FADER START CH FADER START
10
-26dB +10dB -26dB +10dB -26dB +10dB 0 10 MIN MAX
HI 10 HI 10 HI 10 LEVEL 8 FREQ.
METER EFFECT LOOP
8 8 8
6
6 6 6
4
-26dB +10dB -26dB +10dB -26dB +10dB
MID MID MID BOOTH
4 4 4 2 MAIN
2 2 2
0
0 0 0
-26dB +10dB -26dB +10dB
LOW LOW -26dB LOW +10dB 0 LEVEL 10
MIC
DIGITAL CUE
CROSS
FADER 3.5 mm stereo
START B
SAMP.
CH 1 CH 2 CH 3 CH 4 RESET
H/S
BRAKE L-CUE
X MONO R-PGM
mini cord
1 2 3
B H/S 2
OFF 4
CUE PGM STEREO 0 10
PAN LEVEL
H/S 1 CUE/PGM
ASSIGN B
PHONES DJ MIXER
-TRACK HOT START -TRACK PLAY
PARAMETERS TRACK RVS SAMP1 SAMP2 SAMPLER B EXIT/RELOOP PARAMETERS TRACK
PUSH STOP PUSH
ON/OFF OPEN/ FLIP A 3 A 4 B EXIT/ CUE ON/OFF OPEN/
CLOSE RELOOP CLOSE
CLR A3 A4 CUE
A 3/4 A/B TRIM
PITCH/KEY PITCH BEND PITCH/KEY PITCH BEND
FLIP A 1 A 2 B EXIT/
RELOOP
RANGE CLR A1 A2 4 HOT START PITCH/VOL SPLICE RANGE
A3 B A4 B
A1 B A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ. DRAG S.
m s BRAKE
m s f ECHO
MEMO DUMP
PROG RVS
0% 0%
CONT./SINGLE TIME MEMO PROGRAM PLATTER MODE
RELAY TOTAL TIME PRESET RANDOM ALL OFF
CUE
TAP
STUTTER PLAY/PAUSE AUTO
REMOTE CONTROLLER RC-D90
CD2
OPEN/CLOSE OPEN/CLOSE
1 2
POWER Fader jack
ON OFF
X-EFFECT jack
CH2
Input jack
2 3 4
- 20 15 10 7 5 3 1 0 1 3 5 8 +
L
PH2/LN3 PH3/LN5 LINE7 CUE
R
PWR
PGM
- 20 15 10 7 5 3 1 0 1 3 5 8 +
MAX DIGITAL2 LINE4 MIN MAX DIGITAL3 LINE6 MIN MAX DIGITAL4 LINE8
GAIN GAIN ZONE MASTER SUB WOOFER
CH FADER START CH FADER START CH FADER START
10
+10dB -26dB +10dB -26dB +10dB 0 10 MIN MAX
10 HI 10 HI 10 LEVEL 8 FREQ.
METER EFFECT LOOP
8 8 8
6
6 6 6
4
+10dB -26dB +10dB -26dB +10dB
MID MID BOOTH
4 4 4 2 MAIN
2 2 2
0
0 0 0
+10dB -26dB +10dB -26dB +10dB 0 10
LOW LOW LEVEL
DIGITAL MIC
CUE
CROSS
FADER
SAMP. START B
CH 1 CH 2 CH 3 CH 4 RESET
H/S
BRAKE L-CUE
X MONO R-PGM
1 2 3
B H/S 2 OFF 4
CUE PGM STEREO 0 10
PAN LEVEL
H/S 1 CUE/PGM
ASSIGN B
PHONES DJ MIXER
-TRACK HOT START -TRACK PLAY
TRACK SAMPLER PARAMETERS TRACK
RVS SAMP1 SAMP2 B EXIT/RELOOP
STOP
PUSH
ON/OFF OPEN/ EXIT/ ON/OFF OPEN/
FLIP A 3 A 4 B CUE
CLOSE RELOOP CLOSE
CLR A3 A4 CUE
A 3/4 A/B TRIM
PITCH/KEY PITCH BEND PITCH/KEY PITCH BEND
EXIT/
FLIP A 1 A 2 B RELOOP
CLR A1 A2 4 HOT START PITCH/VOL SPLICE
RANGE RANGE
A3 B A4 B
A1 B A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ. DRAG S.
m s BRAKE
m s f ECHO
MEMO DUMP
PROG RVS
0% 0%
CONT./SINGLE TIME MEMO PROGRAM PLATTER MODE
RELAY TOTAL TIME PRESET RANDOM ALL OFF
RC Expansion jack
CUE TAP
STUTTER PLAY/PAUSE AUTO
REMOTE CONTROLLER RC-D90
OPEN/CLOSE OPEN/CLOSE
1 2
POWER
CD2 Output jack
ON OFF

PART NAMES AND FUNCTIONS

3
(1) DN-D9000 Front panel
q
POWER button (¢ON £OFF)
• Push this button to turn power on and off.
NOTE:
• Be sure to close the disc holders before
turning off the power. Otherwise disc
holder may be damaged.
w
POWER indicator
• This indicator lights up red when the power on.
e
Disc holder
• Push OPEN/CLOSE button to open Disc holder.
• Place disc in the tray holder correctly.
• Push OPEN/CLOSE button then Disc holder
closes.
CAUTION:
• Do not place foreign objects in Disc holder,
otherwise damage may occur.
• Do not push Disc holder by hand when the
power off, this may result in malfunction
and damage the drive.
r
Disc holder LED
• Blue LED flashed while Disc holder is opening
and closing.
• This LED lights up and illuminates the Disc
Holder.
t
OPEN/CLOSE button
• To open and close the Disc holder, push this
button.
• This button will not work during playback or
other inhibited mode.
y
CD Drive
• These Drives are field replaceable by you.
• Optional spare drives are sold separately
through any DENON authorized dealer. Product
name: BU-9000.
ENGLISH
(2) DN-D9000 Rear panel
u
Digital output jacks 1, 2
(DIGITAL OUT 1, 2)
• Digital data is output from these jacks.
• Use 75 Ω/ohms pin cord for connections.
NOTE:
• For digital output signal, the output level is
set to -6 dB from the original level in order
to avoid clipping problem when the
Sampler and/or Effector sounds are added.
i
Main Analog output jacks 1, 2
(LINE OUT MAIN 1, 2)
• These are unbalanced RCA output jacks.
• Analog signal outputs.
• Connect to the mixer inputs.
o
Remote connector (REMOTE)
• Connect this connector to the RC-D90 using
the included cord.
!0 X-Effect jack (X-EFFECT)
• Connect this cable to the DENON mixer DN-
X800 with 3.5 mm stereo mini cord.
!1
Monitor Analog output jacks 1, 2
(LINE OUT MONITOR 1, 2)
• These are unbalanced RCA output jacks.
• Alpha-Track audio signals are output.
!2
Fader Start jacks (FADER 1, 2)
• Use these when your mixer has Fader Start
function with 3.5 mm stereo mini cord.
7