Table Of Contents; Main Features; Connections/Installation - Denon DN-D4500 Operating Instructions Manual

Denon operating instructions double cd/mp3 player dn-d4500
Hide thumbs Also See for DN-D4500:
Table of Contents

Advertisement

Available languages

Available languages

- TABLE OF CONTENTS -

Main features .....................................................7
x
Connections/Installation .....................................7
Part names and functions ..........................8 ~ 10
v
Compact discs ..................................................10
Basic operation...........................................10, 11
Pitch/Brake .......................................................11
2 ACCESSORIES
Check that the following parts are included in addition to the main unit:
q Operating instructions ........................................1
w Connection cords for signal output (RCA) ..........2
e Remote control unit (RC-D45) ............................1
1

MAIN FEATURES

The DN-D4500 is a double CD/MP3 player equipped
with a variety of functions and high performance
characteristics, specifically designed for Mobile and
Club DJ's around the world.
Control section
1. The DN-D4500 can be easily mounted on a
standard 19-inch rack.
2. Improved
visibility
under
low
lighting
conditions thanks to a large fluorescent display,
back-lit
illuminated
action
buttons
illuminated disc trays.
3. Improved interface operation thanks to a large
jog/Shuttle wheel and track select knob.
Functions
1. Shockproof function protecting against external
vibrations
2. Auto Level Search / Instant Start
3. Pitch / Pitch Bend & Key Adjust
4. MP3 Playback
It is possible to play MP3 files created in the
specified format found on page 13.
Files can be searched for easily either manually, or
by scanning or using a number of file search
functions (File search, File/Folder search, Artist
name search, Title name search, File name search).
5. Seamless Loop
Playback can be looped between any two points in
a track without any break in the audio. Two loop
start points (A-1 and A-2) can be set anywhere
within the track or disc.
,
MP3 Playback.............................................13, 14
.
Other functions.................................................14
⁄0
Memo .........................................................14, 15
⁄1
Preset ...............................................................15
⁄2
Specifications ...................................................16
r Remote control connection cable.......................1
t Service Station List .............................................1
16. Hot Start / Stutter
Playback can be started instantaneously from
points A-1 and A-2.
In the stutter mode, these same buttons play
momentary audio while pressed and held down.
17. Brake
18. Relay Play
When this mode is set, CD1 and CD2 starts
playback alternately.
This unit can relay the playback of CD1 and CD2
and
every track or every disc.
19. Power on Play
The player can be set so that playback in the relay
mode starts when the power is turned on.
10. Fader Start
The DN-D4500 FADER START controls are
compatible
with
our
DN-X400,
DN-X800, DN-X900 or DN-X1500 mixers.
11. Auto Disc Tray Close System
12. Preset functions - Different presets can be
changed according to your needs.
13. Custom Setting Memory
14. CD TEXT / MP3 ID3 Tag name display
15. CD-R / RW Playback
This player can play CD-R/RW discs, but only if
they are finalized.
Note:
However that depending on the
recording quality, the player may not be
able to play some finalized CD-R/RW
discs.

CONNECTIONS/INSTALLATION

2
1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your
mixer.
3. Connect the control cord to the REMOTE connector
on the RC-D45.
CAUTION:
• Be sure to use the supplied control cord. Using
another type of cable may result in damage.
• Be sure the power is off when connecting the
control cord. Otherwise the units may not work
properly.
• Never connect any remote controllers other than
the RC-D45.
Doing so can damage the equipment.
RCA Cord
3.5 mm stereo
mini cord
DN-X900
DN-D4500
CD1
Fader jack
DN-X500,
CD1 Output jack
NOTE:
• Use a commercially available 3.5mm stereo mini cord for the Fader jack connections.
The DN-D4500 will work normally when the player unit
is mounted within 10 degrees off the vertical plane at
the front panel. If the unit is tilted excessively, the disc
may not be loaded or unloaded properly.
DN-D4500
CH3 input jack
CH4 input jack
CH3 Fader jack
CH4 Fader jack
ENGLISH
Max. 10°
RCA Cord
3.5 mm stereo
mini cord
CD2
Fader jack
CD2 Output jack
7

Advertisement

Table of Contents
loading

Table of Contents