Related Manuals for Clarke MONZA OIL FREE
Summary of Contents for Clarke MONZA OIL FREE
- Page 1 MONZA OIL FREE MONZA OIL FREE AIR COMPRESSOR AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS 0211...
- Page 2 PARTS & SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...
- Page 3 MONZA AIR COMPRESSOR Adjusting Screw FN116005015 O-ring 117 FN010024000 Thank you for purchasing this Clarke Monza Air Compressor, designed for Adjusting Spring FN116005019 DIY and light industrial use, where an output of not more than 7cfm is O-ring 2021 Viton FN010067000 required.
- Page 4 Never direct a jet of compressed air at people or animals, or spray paint towards people or animals. • Use appropriate protective equipment, such as Clarke safety- goggles or glasses, dust masks, ear defenders etc. when using compressed air tools.
- Page 5 Please note that the details and specifications contained herein are correct at the time of going to symbol “ ” or coloured GREEN or GREEN & YELLOW. print. However CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machines data plate •...
- Page 6 PAINT SPRAYING HINTS Cont. MONZA SPRAY UNIT PAINT THINNING For a professional looking finish paint must be thinned. If manufacturers recom- mendations on thinning are not available, the following can be used as a general guide. Water based paints (emulsions) 10-20% water. Oil based paints (gloss) up to 10% thinners.
- Page 7 Set the regulator to the desired operating pressure and then switch the machine PAINT SPRAYING HINTS ON at the rocker switch. The Monza should start immediately. However, if at any time it hesitates to do this, then immediately trigger the spraygun WARNING or tool in order to release any built up pressure.
- Page 8 FAULT FINDING CAUTION With considerate use, your CLARKE Air Compressor should provide you with long and trouble free service. Routine checks should be made on both the electrical Before carrying out any of this service work, always disconnect the Monza from the supply as well as the compressed air lines and connections.
Need help?
Do you have a question about the MONZA OIL FREE and is the answer not in the manual?
Questions and answers