Guest 502-2 Installation And Operation Instructions Manual page 6

Male Plugs on
this end of cable
Do not use
blue wires
Red
24 volts DC
Note: The blue control wire is not used with Model 502-2
502-2 SPOTLIGHT WIRING DIAGRAM
Foam Gasket
10-12 ga. (5mm)
crimp Connector
Black
24 volts DC
1.
Connect Spotlight cable wires to
SAME wire colors of provided cable
10 Amp Fuse
(included)
5
Red
24 volts DC
10 Amp Fuse
(or circuit breaker)
2.
Connect control wires to SAME
wire colors of provided cable
Black
24 volts DC