Advertisement
The GUEST 502-2 Spotlight uses a 100 watt halogen bulb to produce a tightly
focused beam which can illuminate objects up to 1 mile away.
The GUEST 503-2 Spot/Flood light uses a revolutionary dual-focus halogen bulb.
Select the 100 watt, narrow-beam spotlight for illuminating objects up to 1 mile
away or the 55 watt wide-area floodlight for docking and deck lighting.
All Guest Beamer spotlights can rotate 355° and move up and down though an
80° arc. One joystick control panel and 15 feet (4.6M), of control cable
is included.
These units are for 24 volt DC use only
#
Electric drill with 5/16" (7mm) and 1/16" (1mm) drill bits
Wire crimping tool
Screwdriver
2
7/16" (10mm) wrenches
Non-silicon sealant (StarBrite® Boat Caulk #83801 or equivalent)
4
1/4" (6mm) Stainless Steel pan or socket hex head machine bolts
(Bolt length = mounting surface thickness plus 1" (2.5cm)
4
1/4" (6mm) Stainless Steel large O.D. flat washers, lock washers
and hex nuts.
4
# 6 x 1/2" (2mm x 1.5cm) SS pan head self-tapping screws
1
10 amp fuse and fuse holder
10 14-16 gauge (1-2mm) crimp-on butt connectors
4
10-12 gauge (3-5mm) crimp-on butt connectors
You will also need stranded copper, 2-conductor, 12 gauge (3mm)
wire to connect the spotlight and the control panel to 24 volt DC
power sources. (Use 10 gauge (5mm) wire if the light will be more
than 30 feet (9M) from its power source). Marine grade plywood for
backing plate is recommended
Description
Tools and additional materials required
1
Advertisement
