Table of Contents
Advertisement
2.10.2 Audio connector(Line In/Mic In)(CN15)
The PCM-3386 provides all major audio signals on a 5-pin flat-cable con-
nector, CN15. The audio signals include Microphone in (mono), Line in
(stereo).
2.11 COM port connector (CN17)
The PCM-3386 provides two RS-232 serial ports in one COM port con-
nector. It provides connections for serial devices (a mouse, etc.) or a com-
munication network. You can find the pin assignments for the COM port
connector in Appendix B.
2.12 CRT/LVDS interface connections (CN14,CN12)
The PCM-3386's VGA interface can drive conventional CRT displays
and is capable of driving a wide range of LVDS flat panel displays. The
board has three connectors to support these displays: one for standard
CRT VGA monitors,one for LVDS type LCD panels.
2.12.1 CRT display connector (CN14)
CN14 is a 12-pin, dual-inline header used for conventional CRT dis-
plays. A simple one-to-one adapter can be used to match CN14 to a stan-
dard 15-pin D-SUB connector commonly used for VGA. Users can drive
a standard progressive scan analog monitor with pixel resolution up to
1600 x 1200 at 85 Hz and up to 2048 x 1536 at 75 Hz. Pin assignments
for CRT display connector CN14 are detailed in Appendix B.
2.12.2 LVDS connector (CN12)
The PCM-3386 uses the Intel 852 GM chipset that supports single- or
dual-channel LVDS panel up to UXGA panel resolution with frequency
range from 25MHz to 112MHz.
The PCM-3386 supports single or dual-channel LVDS panels up to
UXGA panel resolution with frequency range from 25MHz to 112MHz.
The display mode can be 2 channel (2 x 18bit) LVDS LCD panel dis-
plays.
2.13 Ethernet configuration (CN9)
The PCM-3386 is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3U 10/
100Mbps CSMA/CD standards. It is supported by all major network
operating systems.
PCM-3386 User's Manual
14
Advertisement
Table of Contents
