Transmit Paper Sensor Status - CognitiveTPG A798 Programming Manual

Revision C 12/09

Transmit paper sensor status

ASCII
ESC v
Hexadecimal
1B 76
Decimal 27 118
Values:
Status Byte (RS-232C)
Bit Function 0 Signifies
0 Receipt paper Present
low sensor is enabled)
1 Receipt cover Closed
2 Receipt paper Present
3 Knife position Home position
4 Not used Fixed to zero
5 Temperature In valid range
6 Voltage In valid range
7 Not used Fixed to zero
Sends status data to the host computer. The printer sends one byte to the host computer when it is not busy or in a fault
condition. In DTS/DSR protocol, the printer waits for DSR = SPACE.
Related information
See busy line and fault conditions in the real time commands section of this document for details about fault condition
reporting.
In LEGACY emulation, this command is ignored.
1 Signifies
Low (only if paper
Open
Out
Not home position
Fixed to zero
Too hot or too cold
Too high or too low
Fixed to zero
A798-PG00001C
Chapter 4: Programming Commands 67