Transmit Printer Id - CognitiveTPG A798 Programming Manual

68 Chapter 4: Programming Commands

Transmit printer ID

ASCII
GS I n
Hexadecimal
1D 49 n
Decimal 29 73 n
Value of n:
1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo Definition
Transmits the printer ID specified by n as follows:
n Printer ID Specification
1, 49 Printer model ID A798
2, 50 Type ID Installed options
3, 51 ROM version ID ROM version
4, 52 Logo definition Logo definition
n = 2 or 50: Type ID
Bit Off/On Hex Decimal
0 Off 00 0
On 01 1
1 Off 00 0
On 02 2
2 – – –
3 – – –
4 Off 00 0
5 – – –
6 – – –
7 Off 00 0
n = 4 or 52: Logo Definition
Bit Off/On Hex Decimal
0 Off 00 0
On 01 1
1–7 Off 00 0
Transmits the printer ID specified by n. This command is a batch mode command; that is, the response is transmitted
after all prior data in the receive buffer has been processed. There may be a time lag between the printer receiving this
command and transmitting the response, depending on the receive buffer status.
ID (Hexadecimal)
0x24
Refer to below
0x00
Refer to next
column
Function
No two-byte character code installed.
Two-byte character code installed.
No knife installed.
Knife installed.
Undefined.
Undefined.
Not used. Fixed to Off.
Undefined
Undefined
Not used. Fixed to Off.
Function
No logo downloaded (SRAM or Flash)
Logo downloaded (SRAM or Flash)
Not Used. Fixed to Off.
A798-PG00001C
Revision C 12/09