Switching On And Off - Glow-worm Ultracom 12hxi Instructions For Use Manual

Condensing boilers
Table of Contents

Advertisement

HOW TO USE YOUR APPLIANCE
8.2

Switching On and Off

Switching on
• Remove the cover plate.
COVER PLATE
- Check that the gas service isolation
valve on the appliance is open.
GAS SERVICE
ISOLATION
VALVE
(shown open)
Do not operate the boiler
without water.
• Make sure that:
- The appliance has electrical power,
- The gas service isolation valve is open.
- 12 -
If you are in any doubt about
the boiler being filled with
water contact your installer
or Glow-worm's own service
organisation using the
telephone number shown in
the chapter " Contact your
after-sales organisation".
• Select your required function
press "MODE" repeatedly to
scroll through your options and
select one of the following:-
• Central heating.
• Boiler functions ALL switched off.
• Turn ON your external controls and
select the room temperature required.
• The boiler will operate automatically.
• NOTE: The display will indicate the
Heating system water temperature or a
fault code (see section Fault Finding).
• The control panel will flash and display
all its digits. It will then return to the
default display and depending on the
selected operation and controls, display
the temperature settings.
Switching off
• press "MODE" repeatedly to
scroll through your options and
select
.
All the appliance functions will be switched
off, except frost protection.
0020127403 - 01/11 - Glow-worm

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultracom 12hxi and is the answer not in the manual?

Table of Contents

Save PDF