Saving A Zone And Channel To A Keypad Button; Receiving And Responding To A Radio Call - Motorola APX 4000 User Manual



Saving a Zone and Channel to a Keypad Button

All the programmable buttons and keypad digit 0 to 9 buttons
allow you to save the frequent used zone and channel.
Procedure:
1
Toggle your zone and channel to the required zone and
channel.
2
Press and hold the digit button you desire to program.
3
You hear a short, medium-pitched tone when the zone and
channel is saved.
Note: Repeat this procedure to change the zone and channel
of the programmed button.
Short press of the programmed button changes your current
transmission to the zone and channel programmed in this
button.

Receiving and Responding to a Radio Call

Once you have selected the required channel and/or zone, you
can proceed to receive and respond to calls.
The LED lights up solid red while the radio is transmitting. In
conventional mode, the LED lights up solid yellow when the
radio is receiving a transmission. In trunking mode, there is no
LED indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the LED blinks
yellow.
LED
39
English