Motorola APX 4000 User Manual page 32

Man Down Clear – Clears the alarm of Man Down mode which
was triggered when the radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and a motion
sensitivity level.
Message – Enters the current message list.
Mode Select – Long-press programs a button with the radio's
current zone and channels; then once programmed, the short
press of that button jumps the radio to the programmed zone
and channel.
Monitor (Conventional Only)
for all radio traffic until function is disabled.
Multiple Private Line (Conventional Only)
Multiple Private Line lists.
Nuisance Delete – Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list.
One Touch 1 – 4 – Launches a specific feature with one single
button-press. You can setup as many as four separately
programmed buttons for four different features.
Phone – Allows you to make and receive calls similar to
standard phone calls.
Private Call (Trunking Only)
radio to another individual radio.
12
English
– Monitors a selected channel
– Selects the
– Allows a call from an individual
Private Line Defeat (Conventional Only)
coded squelch (DPL or PL) that is preprogrammed to a channel.
Query – Launches a list of predefined short text messages only
after successfully logged in the Two-Factor Authentication.
Radio Profiles – Allows for easy access to a set of
preprogrammed visual and audio settings of the radio.
Recent Calls – Allows for easy access to the list of calls
recently received or made.
Rekey Request – Notifies the dispatcher you want a new
encryption keys.
Repeater Access Button (RAB) (Conventional Only)
Allows to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
you want a new dynamic regrouping assignment.
Request-To-Talk (Conventional Only)
dispatcher you want to send a voice call.
Scan – Toggles scan on or off.
Secure Transmission Select (Conventional and Trunking)
Toggles the Secure Transmission On or Off when the Secure/
Clear Strapping fields is set to "Select" for the radio's current
channel, and when the radio is model/option capable.
Selective Call (Conventional Only)
– Overrides any
–
– Notifies the dispatcher
– Notifies the
–
– Calls an assigned radio.