Bluetooth Drop Timer; Pairing Bluetooth Device With The Radio - Motorola APX 4000 User Manual



Bluetooth Drop Timer

The Bluetooth Drop Timer has two different settings and
functions, depending upon the selection of the Re-Pair Timer.
Re-Pair Timer
Options
0 – 15 minutes programmable buffer time to
re-establish the Bluetooth Connection when
Immediate
the Bluetooth signal is out of range.
(for headset
If either device powers OFF, the pairing keys
and PTT only)
are immediately cleared from both devices
and the devices must re-pair.
This Timer only applies to the accessory.
The programmable timer choices are: 0 – 15
minutes, 2 hours, 4 hours or 8 hours.
Infinite
This is a "stay alive" time that the accessory
(for headset,
will remain ON without the devices re-
PTT and data
connecting before powering off. The radio
devices)
will remain ON until the user powers the
radio OFF. The radio and accessory will
remain paired indefinitely. Once the devices
re-connect, the timer is reset.
Check with your dealer or system administrator for more
information about these timers.
See Pairing Bluetooth Device with the Radio on page 114 to
establish the Bluetooth Connection.
114
English
Description


Pairing Bluetooth Device with the Radio

The range of Bluetooth operation is 10 meters line-of-sight
communication. This is an unobstructed path between the
location of the signal transmitter (your radio) and the location of
the receiver (your device or accessory).
Obstacles that can cause an obstruction in the line-of-sight
include trees, buildings, mountains, cars and etc.
It is NOT recommended that you leave your radio behind and
expect your accessory to work with a high degree of reliability
when they are separated.
At the fringe areas of reception, both voice and tone quality will
start to sound "garbled" or "broken". To correct this problem,
simply position the Accessory and Radio closer to each other
(within the 10 meter defined range) to re-establish clear audio
reception.
Bluetooth
Pairing
Location