Setting Camera Group To Window - HIKVISION DS-1100KI User Manual

User Manual of DS-1100KI Network Keyboard
windows, then the camera 1-16 will be displayed on window 1-16, camera 17-32 on window 1-16, and
camera 33-34 on window 1-2 in cycle view mode.
Note: The dwell time for the cycle view is set in the input group setting interface, refer to 4.3.4 Setting Input
Group.
Steps:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + CAM-G keys to select the input camera group to be decoded and displayed on the monitor.
Notes:
 In the local live view mode when you input 0+MON keys, the multi-division display mode is not supported.
When you press the 0+CAM keys, it will stop the dynamic decoding of the current window.
 Corresponding error message will appear on the screen when you perform wrong operation.

5.3.4 Setting Camera Group to Window

The video signal from the camera group can be outputted to and displayed on the selected window of monitor in
cycle.
Note: The dwell time for the cycle view is set in the input group setting interface, refer to 4.3.4 Setting Input
Group.
Steps:
1. Press the Num + MON keys to select the monitor.
2. Press the Num + WIN keys or directly touch on the screen to select the display window.
3. Press the Num + CAM-G keys to select the camera group.
Example: You can input the "1+MON, 2+WIN, 3+CAM-G" keys to decode the video signal from camera group 3 and
display it on window 2 of the monitor 1.
Note: In the local live view mode when you input 0+MON keys, the cycle view function is not supported. When
you press the 0+CAM keys, it will stop the dynamic decoding of the current window.
62