HIKVISION DS-1100KI User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Keyboard
  5. DS-1100KI
  6. User manual

HIKVISION DS-1100KI User Manual

Network keyboard
Hide thumbs Also See for DS-1100KI:
Table of Contents

Advertisement

Quick Links

See also: Technical Manual , User Manual

Network Keyboard

User Manual
UD.6L0203D1056A01

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-1100KI

Summary of Contents for HIKVISION DS-1100KI

  • Page 1: Network Keyboard

    Network Keyboard User Manual UD.6L0203D1056A01...
  • Page 2 User Manual of DS-1100KI Network Keyboard Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: • Ensure unit is placed in a well-ventilated, dust-free environment. • Keep all liquids away from the keyboard.

  • Page 3: Table Of Contents

    User Manual of DS-1100KI Network Keyboard Table of Contents Chapter 1 Introduction ..............................6 1.1 Overview ............................... 6 1.2 Features ................................ 6 1.3 Appearance ..............................8 Chapter 2 Operation Guide ............................9 2.1 User Account ..............................9 2.2 Indicators & Buttons ............................. 9 2.3 Button Operation ............................
  • Page 4 User Manual of DS-1100KI Network Keyboard 4.1.4 Alarm Settings ..........................39 4.1.5 Exceptions ............................ 41 4.1.6 Maintenance ..........................41 4.1.7 Stream Media Settings ......................... 42 4.2 Decoder Settings ............................43 4.2.1 Network Settings .......................... 43 4.2.2 Serial Port Settings ........................43 4.2.3 Output Settings ..........................
  • Page 5 User Manual of DS-1100KI Network Keyboard 5.3.7 Calling a Tour ..........................64 5.3.8 Setting a Group Tour ........................64 5.3.9 Calling a Group Tour ........................65 5.3.10 Operating Instant Playback ......................65 5.3.11 Operating Image Switch ........................ 66 5.4 PTZ Control ..............................67 5.4.1 PTZ Control Function ........................
  • Page 6 User Manual of DS-1100KI Network Keyboard 7.1.3 User Management .......................... 96 7.1.4 Device Management ........................98 7.1.5 Maintenance ..........................99 7.2 Configuring by Operator ........................... 100 7.2.1 Device List ............................. 100 7.2.2 Input Settings ..........................101 7.2.3 Output List ............................ 103 7.2.4 AUX Functions ..........................

  • Page 7: Chapter 1 Introduction

    1.1 Overview DS-1100KI Network Keyboard can be used to control the camera/speed dome, display of decoded video on video wall, control of matrix, as well as support 1 channel of video view at up to 1080P resolution. Designed with touch screen, it is easy to operate and configure settings.
  • Page 8 User Manual of DS-1100KI Network Keyboard  Display of decoded camera group on selected window;  Sequence display of decoded camera group on monitor;  Sequence display of decoded camera group on monitor group;  Display of video via MVC on video wall.

  • Page 9: Appearance

    User Manual of DS-1100KI Network Keyboard 1.3 Appearance Front View: Description of panel: Serial No. Description Serial No. Description Record playback Functional buttons Numeric buttons PTZ control area Interface Description: Serial No. Description Serial No. Description Touch pen Line In...

  • Page 10: Chapter 2 Operation Guide

    User Manual of DS-1100KI Network Keyboard Chapter 2 Operation Guide 2.1 User Account The keyboard user account is classified to two types: the admin and the operator. The admin user is authorized with the following operation permissions: 1. Add a maximum of 3 operators;...
  • Page 11 User Manual of DS-1100KI Network Keyboard Functional Buttons: MON-G CAM-G Select monitor Select window Select camera Select monitor group Select camera group MULT TOUR GROUP Multi-division Call Set or call tour Set or call group Set mode PRESET CALL PATROL...
  • Page 12 User Manual of DS-1100KI Network Keyboard 4-axis Joystick: Use the joystick to realize pan and tilt movement at 8 directions. The 4-axis joystick can be used to control the zoom; and the central button used as Enter button and to realize picture capture as well.

  • Page 13: Button Operation

    User Manual of DS-1100KI Network Keyboard 2.3 Button Operation 2.3.1 Operating Video Wall Display Button Description Example Num+MON: select the video output channel to Press the 2+MON buttons to select the monitor be displayed on the video wall. Note: When the Num=0, the system enters the local live view mode.

  • Page 14: Other Buttons

    User Manual of DS-1100KI Network Keyboard 2.3.3 Other Buttons Button Description Example Num+MAC: call the MAC command. Press the 1+MAC buttons to call the MAC command 1. SHIFT SHIFT+LOCK: lock/unlock the system. Press the SHIFT+LOCK buttons to lock/unlock the system.

  • Page 15: Input Method Shift

    User Manual of DS-1100KI Network Keyboard 2.4 Input Method Shift Click the tab on the soft keyboard to enter the interface for inputting the English letters, and the can be used to switch the uppercase/lowercase. Click the tab on the soft keyboard to enter the interface for inputting the numerals.

  • Page 16: Quick Configuration Guide

    User Manual of DS-1100KI Network Keyboard 2.6 Quick Configuration Guide Steps: When the keyboard has started up, it enters the following interface: For basic keyboard operation, select the Keyboard icon to continue and enter the login interface. Select admin on the login interface and then input the admin password (default: 12345) to enter the admin interface of keyboard operation.
  • Page 17 User Manual of DS-1100KI Network Keyboard Click Return to back to the main interface. Click Device on the admin main interface to enter the device management menu. Click Add Device to enter the Device-Add Device interface. Input the device name, device IP/domain name, port, user name and password, and then click Add to add the device.
  • Page 18 User Manual of DS-1100KI Network Keyboard 11. Return to the User List interface, and click of the selected user to enter the User-Device interface. 12. Click Add Device to enter the User-Add Device interface. Select the device by clicking the checkbox, and click Add to add the device for the current user.

  • Page 19: Quick Operation

    User Manual of DS-1100KI Network Keyboard 2.7 Quick Operation Multi-division Display The Operator user is allowed to select different multi-division display modes for the selected output channel. Currently, 1/4/9/16-division display modes are configurable. Steps: 1. Press the Num + MON keys to select the monitor.

  • Page 20: Chapter 3 Local Keyboard Configuration By Admin

    User Manual of DS-1100KI Network Keyboard Chapter 3 Local Keyboard Configuration by Admin You can configure the keyboard by locally, WEB page or by the configuration tool. This chapter introduces the local keyboard configuration. 3.1 Login Steps: Click the Keyboard icon on the startup interface.

  • Page 21: Viewing Version Information

    User Manual of DS-1100KI Network Keyboard 3.2.1 Viewing Version Information Click Version to enter the Keyboard-Version interface to view the current version information of the keyboard. 3.2.2 Configuring Network Settings Configure the network settings of the keyboard, including the Port, IP address, Subnet Mask, Default Gateway, Preferred DNS and Alternate DNS.

  • Page 22: Configuring Time Settings

    User Manual of DS-1100KI Network Keyboard Click Apply to save the settings. 3.2.4 Configuring Time Settings Date: Click to select the date from the calendar. Time: Click to decrease or increase the time value. Click Apply to save the settings.

  • Page 23: Calibrating Screen

    User Manual of DS-1100KI Network Keyboard 3.2.6 Calibrating Screen In order to use the touch screen correctly, it needs to calibrate the screen positioning properly. Steps: Click Calibration to start the calibration of touch screen positioning. The system will pop up the Hint message box. Click Yes to continue the calibration.

  • Page 24: Device Management

    User Manual of DS-1100KI Network Keyboard If the upgrading is failed, the corresponding error message box will pop up. Note: When the upgrading is successful, the keyboard will restart automatically to complete the upgrade. Upgrade by USB-flash Disk Steps: Insert the U flash disk to the USB interface and then click USB Upgrade to enter the USB upgrade interface.

  • Page 25: Editing/Deleting Device

    User Manual of DS-1100KI Network Keyboard Steps: Click Auto Search button at the upper left corner to enter the Device-Auto Search interface. Note: Only the device that is in the same network segment with the keyboard can be searched out by the keyboard.

  • Page 26: User Management

    User Manual of DS-1100KI Network Keyboard Delete Device On the Device-Device List interface, select the device from the list to be deleted, and click to delete it. In the pop-up message box, click Yes to finish the deletion. 3.4 User Management Click User on the admin main interface to enter the User-User List interface.

  • Page 27: Setting The Related Device

    User Manual of DS-1100KI Network Keyboard Click Add to finish the adding of user. 3.4.2 Setting the Related Device Purpose: To the added operators, they do not have the permission of adding devices. Perform the following procedures to relate devices to the operators.

  • Page 28: Editing User Password/Deleting User

    User Manual of DS-1100KI Network Keyboard Enter the User-Device interface, you can select the device from the list and click to delete the related device for the current user. In the pop-up message box, click Yes to confirm the deletion.

  • Page 29: Default

    User Manual of DS-1100KI Network Keyboard Importing Configuration File Insert the U-flash disk to the USB interface on the keyboard. Enter the disk to select a file. Click Import to import the configuration file. Exporting Configuration File Insert the U flash disk to the USB interface on the keyboard.

  • Page 30: Logout

    User Manual of DS-1100KI Network Keyboard Click Default on the admin main interface. And select default type in the pop-up box. Click Yes to continue the operation, or No to cancel the operation. 3.6 Logout Click Logout on the admin main interface, and the message box “Logout now?” pops up.

  • Page 31: Chapter 4 Local Keyboard Configuration By Operator

    User Manual of DS-1100KI Network Keyboard Chapter 4 Local Keyboard Configuration by Operator Steps: On the User Login interface, select the user name (operator) and enter password. If needed, check the checkbox of Remember Password to save the login password for future use.

  • Page 32: Encoder Settings

    User Manual of DS-1100KI Network Keyboard 4.1 Encoder Settings Click of an encoder on the Device List interface and enter its remote settings interface. You can configure the settings for network, RS-232/RS-485 serial port, camera, alarm, exception, stream media, etc.

  • Page 33: Camera Settings

    User Manual of DS-1100KI Network Keyboard You can set the RS232 port and RS485 parameters. 4.1.3 Camera Settings Click Camera on the remote settings interface to enter the Camera Settings interface. You can configure the video display, video parameters, record settings, motion detection, video loss detection, tampering alarm, privacy mask, and IPC management (for hybrid DVR and NVR only).
  • Page 34 User Manual of DS-1100KI Network Keyboard Configuring Video Parameters On the Video Parameters interface, you can select the camera name for configuration, set the main/sub stream, stream type, resolution, frame rate, bit rate type, Max. bit rate, and image quality. You can also copy the current settings to other camera(s).
  • Page 35 User Manual of DS-1100KI Network Keyboard time for the file should be determined by the capacity of the HDD. Redundant Record: Enabling redundant record or capture means you save the record and captured picture in the redundant HDD. Record Audio: Choose “yes” to record the sound, “no” to record the image without sound.
  • Page 36 User Manual of DS-1100KI Network Keyboard Select the camera for configuring motion detection. Click the checkbox of Enable item to enable motion detection. Set the sensitivity level. Up to 6 levels and OFF are selectable. Click the Set button beside Area Settings to set motion detection area.
  • Page 37 User Manual of DS-1100KI Network Keyboard 10. After having configured the above setting and if you want to configure the other cameras with the same settings, choose the camera and click Copy. You can also select All to copy the current settings to all cameras.
  • Page 38 User Manual of DS-1100KI Network Keyboard After having configured the above setting and if you want to configure the other cameras with the same settings, choose the camera and click Copy. You can also select All to copy the current settings to all cameras.
  • Page 39 User Manual of DS-1100KI Network Keyboard Select the camera for configuring privacy mask. Click the checkbox of Enable item to enable privacy mask. Click the Set button beside Area Settings to set privacy mask area. Please refer to the settings of motion detection area.

  • Page 40: Alarm Settings

    User Manual of DS-1100KI Network Keyboard camera to add by changing the disabling the analog camera (s). Click the Analog List tag to enter the analog camera management interface. You can the information of the connected analog camera. Click Status to enter the Analog Camera Status interface.
  • Page 41 User Manual of DS-1100KI Network Keyboard triggered camera and PTZ linkage (calling defined preset / patrol / pattern). After having configured the above setting and if you want to configure the other cameras with the same settings, choose the camera and click Copy. You can also select All to copy the current settings to all cameras.

  • Page 42: Exceptions

    User Manual of DS-1100KI Network Keyboard Click OK to return to the Alarm Settings interface. 4.1.5 Exceptions Configure the exception handling method (s) for each exception type. Steps: Click Exceptions on the remote settings interface to enter the Exception Settings interface.

  • Page 43: Stream Media Settings

    User Manual of DS-1100KI Network Keyboard HDD Management: Set and initialize HDD, and set HDD in group management. User Management: Add/edit/delete user account, and assign operating permissions for each user. Device Information: View the version and basic information of the encoder device.

  • Page 44: Decoder Settings

    User Manual of DS-1100KI Network Keyboard 4.2 Decoder Settings Click the of a decoder on the Device List interface and enter its remote settings. On this interface, you can configure the settings for network, RS-232/RS-485 serial port, output, decoding status, maintenance, etc.

  • Page 45: Output Settings

    User Manual of DS-1100KI Network Keyboard You can set the RS232 port and RS485 parameters. 4.2.3 Output Settings You can configure parameters for the display of decoded output video on monitor. Steps: Click Output on the remote settings interface to enter the Output Settings interface.

  • Page 46: Decoding Status

    User Manual of DS-1100KI Network Keyboard Select the video wall No. to configure and enable the video wall display by checking the Enable checkbox. Select the window-division mode. Set the decoding channel and the output resolution. Select the screen No. of the selected video wall and the output channel of the decoder.

  • Page 47: Input Settings

    User Manual of DS-1100KI Network Keyboard Device Information: View the version and basic information of the decoder device. Device Upgrade: Remotely upgrade the device by USB file. Import/Export: Import/export configuration files. Restore Default: Restore factory default settings. 4.3 Input Settings Click Input on the main interface to enter the Input Settings-Input List interface.

  • Page 48: Editing A Camera

    User Manual of DS-1100KI Network Keyboard Select an encoding device from the list and click the icon to enter the local live view by the channel-zero. Note: The channel-zero must be supported by the connected encoding device and has been enabled.

  • Page 49: Output Settings

    User Manual of DS-1100KI Network Keyboard Note: Up to 16 camera groups can be added. Click the Add Camera key to enter the Add Camera interface: Select the cameras from the list to be added to the group, and then click Add to finish the setting.

  • Page 50: Playback By Time

    User Manual of DS-1100KI Network Keyboard Input the display window. Note: Please refer to the window-division mode in the 4.2.3 Output Settings before inputting the display window here. Input the Camera No. for playback. If the encoding device is ATM DVR, you can input the Card No.

  • Page 51: Editing An Output Channel

    User Manual of DS-1100KI Network Keyboard here. Input the Camera No. for playback. Set the start time and end time of the video files for playback. Click Playback to start playback. Note: The Playback Control buttons on the left side of the control panel are supported during the playback.

  • Page 52: Setting Video Wall / Scene

    User Manual of DS-1100KI Network Keyboard Select the outputs from the list to be added to the group, and then click Add to finish the setting. Click Finish to return to the Output Group interface, where you can view the successfully added output channels for the current group.
  • Page 53 User Manual of DS-1100KI Network Keyboard Operation: Press the “Num + MAC” keys to call the programmed macro command. Click Macro on the main interface to enter the Macro Settings interface. Adding Macro Click Add Macro to enter the Macro Setting-Add Macro interface. Edit the macro name, and press the command keys on the keyboard to enter the text box below.

  • Page 54: Playback

    User Manual of DS-1100KI Network Keyboard interface to call the macro command. Deleting Macro You can click to delete the added macro command. 4.6 Playback The video files stored in the encoding device can be played back through the related decoder. Three playback modes are available: playback by USB file, playback by time and playback by file.

  • Page 55: Playback By File

    User Manual of DS-1100KI Network Keyboard Click Playback to play the selected video file. 4.6.2 Playback by File Steps: Click the By File tab on the Local Playback interface to enter the Playback by File interface. Input the Camera No. for playback.

  • Page 56: Playback By Time

    User Manual of DS-1100KI Network Keyboard 4.6.3 Playback by Time Click the By Time tab on the Local Playback interface to enter the Playback by Time interface. Input the Camera No. for playback. Set the start time and end time of the video files for playback.

  • Page 57: Aux Key Settings

    User Manual of DS-1100KI Network Keyboard 4.7.2 AUX Key Settings Click Aux Key on the Advanced Settings interface to enter the Aux Key Settings interface. On the Advanced Settings-Aux Key interface, the Aux Key 1 and Aux Key 2 correspond to the AUX1 and AUX2 keys on the keyboard respectively.

  • Page 58: Ftp Settings

    User Manual of DS-1100KI Network Keyboard 4.7.4 FTP Settings The video files or captured pictures can be uploaded to FTP server. Steps: Click FTP Settings on the Advanced Settings interface to enter the FTP Settings interface. Check the checkbox of Enable FTP.

  • Page 59: Shutdown

    User Manual of DS-1100KI Network Keyboard 4.10 Shutdown Click Shutdown on the main interface, the message box “Shut down now?” will pop up. Click Yes to confirm the shutdown, or No to cancel the operation.

  • Page 60: Chapter 5 Keyboard Operation

    User Manual of DS-1100KI Network Keyboard Chapter 5 Keyboard Operation 5.1 Shortcut Operation The operating user must log in the keyboard to realize all shortcut operations (except LOCK). Shortcut Operation: Press the Num keys on the keyboard to enter the shortcuts operation interface.

  • Page 61: Display Of Decoded Video On Monitor

    User Manual of DS-1100KI Network Keyboard Press the ESC key on the keyboard to enter full-screen preview mode. Notes:  Up to 1080P resolution is supported for local live view.  User can press the 0+CAM keys to stop the live view of the current window.

  • Page 62: Setting Camera To Monitor

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when user performs wrong operation. E.g., when the multi-division number entered is not supported by the current output channel, the message “Window mode error.” will appear.

  • Page 63: Setting Camera Group To Window

    User Manual of DS-1100KI Network Keyboard windows, then the camera 1-16 will be displayed on window 1-16, camera 17-32 on window 1-16, and camera 33-34 on window 1-2 in cycle view mode. Note: The dwell time for the cycle view is set in the input group setting interface, refer to 4.3.4 Setting Input Group.

  • Page 64: Setting Camera Group To Monitor Group

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the lower-left corner of the screen when you perform wrong operation. 5.3.5 Setting Camera Group to Monitor Group The selected camera group signal can be outputted and displayed by the decoding channel on the selected monitor group.

  • Page 65: Calling A Tour

    User Manual of DS-1100KI Network Keyboard Up to 8 tours can be supported currently. The dwell time of the tour is the length of time used for switching from one camera to the next camera in the tour. All cameras are set with the same dwell time.

  • Page 66: Calling A Group Tour

    User Manual of DS-1100KI Network Keyboard Press the Num + ENTER keys to set the camera group (CAM-G) number. Repeat step 3-4 to set other monitors and camera groups. Press the SET key to finish the group tour settings. Notes: ...

  • Page 67: Operating Image Switch

    User Manual of DS-1100KI Network Keyboard 4. Press the key to enter the instant playback interface. Notes:  The local playback by time is not supported.  You can press the button to stop the instant playback. Other playback operation: Rotate the outer ring of the shutter in clockwise direction to speed up the playback, with the max.

  • Page 68: Ptz Control

    User Manual of DS-1100KI Network Keyboard 5.4 PTZ Control 5.4.1 PTZ Control Function If the camera connected to the keyboard supports PTZ function, you are allowed to operate the LIGHT/FOCUS/IRIS/ZOOM/WIPER buttons to realize PTZ control. Two operation methods can be used to realize PTZ control: Method 1: Press the Num + MON keys to select the monitor.

  • Page 69: Calling A Preset

    User Manual of DS-1100KI Network Keyboard Steps: Press the Num + CAM keys to select the input channel. Operate the joystick to move PTZ to the desired position. Press the Num + PRESET keys to set the current position as the preset with entered number.

  • Page 70: Setting A Patrol

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.4 Setting a Patrol Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 71: Calling A Patrol

    User Manual of DS-1100KI Network Keyboard Input Num and press the ENTER key to set the preset number, stop time and speed respectively. Press the SET key again to finish the patrol settings. Notes:  It is invalid to input the 0+CAM keys in the current operation mode.

  • Page 72: Setting A Pattern

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.6 Setting a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 73: Calling A Pattern

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.7 Calling a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 74: Calling Pan Scan

    User Manual of DS-1100KI Network Keyboard Note: Corresponding error message will appear on the screen when you perform wrong operation. 5.4.8 Calling Pan Scan Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera.

  • Page 75: Aux Functions

    User Manual of DS-1100KI Network Keyboard 5.5 Aux Functions The keyboard is designed with AUX1 and AUX2 keys on its panel. You are allowed to configure Aux function for AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to two-way audio and the AUX2 to picture capture function.

  • Page 76: Recording

    User Manual of DS-1100KI Network Keyboard Note: When the current window is configured with multiple channels for display (in cycle view mode), the error message will appear on the screen as well. 5.5.3 Recording The video from the camera can be recorded and saved in the local U-flash disk or uploaded to FTP server as well.

  • Page 77: Chapter 6 Server Operation

    User Manual of DS-1100KI Network Keyboard Chapter 6 Server Operation 6.1 Control of MVC Through the DS-1100KI keyboard, you can configure and control the Multi-function Video Center (MVC). 6.1.1 Login Steps: Click the Server icon on the startup interface to enter the Server Login interface.
  • Page 78 User Manual of DS-1100KI Network Keyboard The device types in the MVC system are shown as follows: M_ENC: Encoding module M_DEC: Decoding module M_CODE: Code distribution module M_CAS_IN: Input cascading module M_CAS_OUT: Output cascading module M_INTEL: Intelligent module M_ALARM: Alarm module...

  • Page 79: Camera List

    User Manual of DS-1100KI Network Keyboard Please refer to the Chapter 4.1 Encoder Settings~ Chapter 4.2 Decoder Settings for details. 6.1.3 Camera List Viewing Camera List Click the Camera tab to view the information of all cameras connected to the current MVC system, including the camera ID, channel No., IP address and port.

  • Page 80: Monitor List

    User Manual of DS-1100KI Network Keyboard Select the cameras from the list to be added to the group, and then click Add to add the selected cameras. You can also set or edit the Cycle Time (1-65535s) for cameras here.
  • Page 81 User Manual of DS-1100KI Network Keyboard Configuring monitor settings: Decoding Ability: Set the parameters according to the resolution of the front-end device. If the maximum resolution of the front-end devices connected is 720P, then the Maximum Ability should be set as 720P.

  • Page 82: Displaying Video On Monitor

    User Manual of DS-1100KI Network Keyboard Click the Add Output key to enter the Add Output interface: Select the outputs from the list to be added to the group, and then click Add to finish the setting. Click OK to return to the MVC Output Group interface, where you can view the successfully added output channels for the current group.

  • Page 83: Scene Settings

    User Manual of DS-1100KI Network Keyboard 3. Press the Num + CAM keys to select the input camera. Example: You can press the “1+MON, 2+WIN, 3+CAM” keys to decode the video signal from camera 3 and display it on window 2 of monitor 1.

  • Page 84: Screen Settings

    User Manual of DS-1100KI Network Keyboard Press the Num + WIN keys or click on the window to select the window No. Press the Num + CAM keys to select the camera No. of which the video is displayed on the selected window.
  • Page 85 User Manual of DS-1100KI Network Keyboard selected to 2 x 2, then the sub-windows can be numbered as 1, 2, 3 and 4. (3) Select the sub-screen No., which refers to the output connected to the selected sub-window in Step 5 (1).
  • Page 86 User Manual of DS-1100KI Network Keyboard Setting Base Picture Note: When the MVC is configured with the enhanced decoder module, you can set the base picture for the screen display. Steps: Put the base picture in the USB-flash disk and insert it into the keyboard.

  • Page 87: Control Of Analog Matrix

    User Manual of DS-1100KI Network Keyboard 6.2 Control of Analog Matrix 6.2.1 Login Before you start: Make sure the analog matrix has been correctly connected to the keyboard before operation. Steps: Select the login mode to Analog Matrix on the Server Login interface.

  • Page 88: Operating Analog Matrix

    User Manual of DS-1100KI Network Keyboard Input the address of the connected analog matrix. Each matrix must be assigned with unique address. Select the baud rate of the connected analog matrix. Set the data bit, stop bit, parity and flow control the same with those of the connected analog matrix.

  • Page 89: Operating Ptz Control

    User Manual of DS-1100KI Network Keyboard Input the address of the connected PTZ camera. The address ranges from 0~255. Select the baud rate of the connected PTZ camera. Set the data bit, stop bit, parity and flow control the same with those of the connected PTZ camera.
  • Page 90 User Manual of DS-1100KI Network Keyboard Setting/Calling a Patrol • Setting a Patrol Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Press the SET key to enter the settings interface. Press the Num + PATROL keys to enter the patrol settings interface.

  • Page 91: Access By Ivms Platform

    User Manual of DS-1100KI Network Keyboard Setting/Calling a Pattern • Setting a Pattern Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Press the SET key to enter the settings interface. Press the Num + PATTERN keys to enter the pattern settings interface.

  • Page 92: Logging In To The Ivms Platform

    User Manual of DS-1100KI Network Keyboard 6.3.1 Logging in to the iVMS Platform Steps: On the Server Login interface, select the Login Mode to iVMS Platform. Enter the Server IP, Port, login User Name and Password. Click Login to log in to the platform.

  • Page 93: Managing Input Channel

    User Manual of DS-1100KI Network Keyboard Click Layout to enter the Screen Layout interface: The corresponding output channel is corresponding to the Index No. on the Screen Group interface of the keyboard, e.g., the index 1 corresponds to the 108_vga_0 output channel.

  • Page 94: Local Live View

    User Manual of DS-1100KI Network Keyboard Select an input channel from the list and click it to enter the Modify Camera interface to modify the index No. in the Indexcode filed. Press the Index No. + CAM keys (e.g., 1 + CAM) on the keyboard to select the input channel.

  • Page 95: Playback

    User Manual of DS-1100KI Network Keyboard Press the Num + CAM keys on the keyboard to select the input channel for display on the selected window. 6.3.6 Playback 1. On the Control Center Unit List interface after login, click the icon of a screen group item to enter the list of output channels.

  • Page 96: Chapter 7 Keyboard Configuration By Web Server

    User Manual of DS-1100KI Network Keyboard Chapter 7 Keyboard Configuration by WEB Server You are also allowed to configure the keyboard parameters by WEB server. 7.1 Configuring by Admin 7.1.1 Login Open WEB browser, input the IP address of the keyboard (e.g., http://172.6.24.64) and click Enter.

  • Page 97: User Management

    User Manual of DS-1100KI Network Keyboard On this interface, you can configure the hardware and network parameters of the keyboard. 7.1.3 User Management Click User on the left navigation bar to enter the User management interface: On this interface, you can add, edit or delete the user account.
  • Page 98 User Manual of DS-1100KI Network Keyboard Deleting a User Select a user from the list and click the icon. In the pop-up message box, click OK to delete the selected user account. Setting User-Device Select a user from the list and click the button to enter the User-Device interface.

  • Page 99: Device Management

    User Manual of DS-1100KI Network Keyboard On the User-Device interface, you can view the successfully added devices for the current user. You can also select the device from the list and click the icon to delete it. 7.1.4 Device Management Click Device on the left navigation bar to enter the Device management interface: On this interface, you can add, edit or delete the device.

  • Page 100: Maintenance

    User Manual of DS-1100KI Network Keyboard Deleting a Device Select a device from the list and click the icon to delete it. 7.1.5 Maintenance Checking Device Work Status Click the Work Status on the left navigation bar to check the work status of the keyboard.

  • Page 101: Configuring By Operator

    User Manual of DS-1100KI Network Keyboard To import the configuration file, click the Browse button and specify the directory of the file in the pop-up box, and click the Import button. To export the configuration file, click the Export button and specify the saving directory of the exported file.

  • Page 102: Input Settings

    User Manual of DS-1100KI Network Keyboard After successful login, you enter the Device List interface: On the device list, select an encoding device and click the icon to enter the Network-Stream media interface to configure stream media for the device.
  • Page 103 User Manual of DS-1100KI Network Keyboard Setting a Camera Group Click the Group button on the Input List to enter the Input Group interface: Select the Group No. and edit the cycle time in the given text filed, and click Set button.

  • Page 104: Output List

    User Manual of DS-1100KI Network Keyboard 7.2.3 Output List Click Output Settings on the left navigation bar to enter the Output List interface: Editing an Output Channel By selecting an output channel from the list and clicking the icon, you are allowed to edit its output No..

  • Page 105: Aux Functions

    User Manual of DS-1100KI Network Keyboard Click the icon to edit the video wall / scene No.. 7.2.4 AUX Functions Click the Aux Key on the left navigation bar to enter the Aux Key settings interface: On this interface, you can set the function of Aux Key 1 / Aux Key 2 to two-way audio, picture capture, or video wall/scene switch.
  • Page 106 User Manual of DS-1100KI Network Keyboard Check the checkbox of Enable FTP. Enter the IP address of the FTP server. Enter the user name and password of login to the FTP server. Enter the file path to which the video files and captured pictures are uploaded.

  • Page 107: Chapter 8 Keyboard Configuration Tool

    User Manual of DS-1100KI Network Keyboard Chapter 8 Keyboard Configuration Tool Purpose: The configuration tool of the DS-1100KI keyboard is used to facilitate the parameters configuration of the keyboard. 8.1 System Requirements System requirement: 32-bit Windows XP / Windows 7.

  • Page 108: Login By Local Configuration File

    User Manual of DS-1100KI Network Keyboard storage device via U-flash disk.  Remote Config File: Operate and edit the configuration file of the keyboard which has been exported to PC or local storage device via network.  Update Keyboard: Upgrade the keyboard via network.

  • Page 109: Remote Upgrade

    User Manual of DS-1100KI Network Keyboard Click to select the saving directory for the configure file. Input the IP address and port number of the keyboard. Input the user name and password for login to the keyboard. Click Export to export the keyboard configure file to the defined directory, or click Export&login to export log in the software.

  • Page 110: Configuring Keyboard By Configuration Tool

    User Manual of DS-1100KI Network Keyboard Input the IP address and port number of the keyboard. Input the user name and password for login to the keyboard. Click Update to start upgrading the keyboard. The upgrading process can be viewed on the Status bar.
  • Page 111 User Manual of DS-1100KI Network Keyboard Select the Type to Single or Batch. Single IP: add single device each time. Batch IP: add multiple devices located in the same network segment. Enter the device IP for Single IP mode, or the Start IP and the End IP for the Batch IP mode.

  • Page 112: Managing User List

    User Manual of DS-1100KI Network Keyboard Modifying a Device Select a device from the list, and click to enter the Modify Device interface: You are allowed to modify the port, login user name and password. Click Modify to finish the modification.
  • Page 113 User Manual of DS-1100KI Network Keyboard Adding a User Account Click to enter the Add User interface. Enter the username and password. Click Add to add the new user account. The successfully added user accounts are listed on the interface:...
  • Page 114 User Manual of DS-1100KI Network Keyboard Deleting a User Account Select the user account(s) from the list, and click . The following message box pops up: Click OK to confirm the deletion. Modifying Password Select a user account from the list, and click...
  • Page 115 User Manual of DS-1100KI Network Keyboard Enter the new password. Click OK to finish the password modification. Adding the Device to User Select a user account from the list and double-click it to enter the User Devices interface. Select a device or multiple devices from the device list on the left and then click The device (s) successfully added for the current user will be displayed in the list on right.

  • Page 116: Managing Channel List

    User Manual of DS-1100KI Network Keyboard You can select the added device from the list on right and click to delete it from the current user account. Adding Stream Media Server to Device On the User Devices interface, select a decoder or multiple decoders from the list of added devices on right,...
  • Page 117 User Manual of DS-1100KI Network Keyboard Modifying Channel Index by Single Enter the username of operator in the Channel Type field. Only the operator user account has the permission to operate channel management. Click to get the channel list. Select an item from the list, and enter the new index in the Channel Modify field.
  • Page 118 User Manual of DS-1100KI Network Keyboard Select multiple items from the list, and enter the new index in the Channel Modify field. Note: The new index you enter refers to the starting index No. of the channel list. Click to finish the channel index modification.

  • Page 119: Importing Configuration File

    User Manual of DS-1100KI Network Keyboard 8.4.4 Importing Configuration File Click the Maintain on the menu bar to enter the Keyboard Maintenance interface. Select the directory of the keyboard configuration file. Enter the IP address of the keyboard. Enter the username and password.

  • Page 120: Appendix 1: Specifications

    User Manual of DS-1100KI Network Keyboard Appendix 1: Specifications Model DS-1100KI Control Mode IP-based 7” TFT LCD monitor with touch panel TFT LCD Panel Resolution: 800 × 480 Joystick 4-axis joystick Line In 1-ch, 3.5 mm connector (2.0 Vp-p, 1 kΩ)

  • Page 121: Appendix 2: Upgrade By Ftp

    User Manual of DS-1100KI Network Keyboard Appendix 2: Upgrade by FTP Enable the FTP service on PC and operate the following steps: Steps: Open the wftp software, and then select Security->Users/rights option. Create new user. Input the user name: target, password: target, and then click OK to continue.

  • Page 122: Appendix 3: Version Update

    User Manual of DS-1100KI Network Keyboard Appendix 3: Version Update Version 2.3.0 Updated features: Connectable to 64-ch NVR. Support video wall display control for decoder. Refer to 4.2.4 Video Wall. Support Video Wall/Scene setting for output channel. Refer to 4.4.4 Setting Video Wall / Scene.
  • Page 123 User Manual of DS-1100KI Network Keyboard Add remote parameters configuration for encoding device. Refer to 4.1 Encoder Settings for details. Add remote parameters configuration for decoding device. Refer to 4.2 Decoder Settings for details. Configure keyboard parameters by WEB Server. Refer to Chapter 7 Keyboard Configuration by WEB Server for details.
  • Page 124 User Manual of DS-1100KI Network Keyboard...

Table of Contents