Kawai CL35 Owner's Manual page 36

Page
36
Caution
6. Fasten the left and right Arms (E) to the
digital piano using two medium screws (d)
on each side.
Place brown (for rosewood model) or beige
(for cherry model) Caps (K/L) over the two
exposed screws (d) either side.
Caution
7. Insert the Music Rack (F) into the holes on
the top of the Main Unit.
8. Connect the Pedal Board pedal cable to the
Pedal jack on the Main Unit, inserting the plug
with the lever/lock tab facing outward. (*1)
Attach the pedal cable to the binding on the
left Side Board. (*2)
Connect the AC adapter and the power cord
fi rmly.
Connect the AC adaptor to the AC IN jack on
the Main Unit. (*3)
Attach the AC adapter cable to the binding
on the right Side Board. (*4)
9. Turn the Adjuster (installed on the bottom
of the Pedal Board) until firm contact is
made with the fl oor. If the fl oor is carpeted,
place a spiked furniture cup below the
Adjuster so that fi rm contact is made with
the carpet backing. Press one of the pedals.
If the pedal rail fl exes, continue to lower the
Adjuster until fl exing is minimised.
Caution
6
ATTACHING THE HEADPHONE HOOK
10. Attach the headphone hook to the bottom
of the piano using the two small screws
supplied.
Ensure that the CL35 digital piano is correctly secured to the stand by using the screws included.
Failing to do so may result in the unit falling from the stand, causing damage or personal injury.
Ensure that small children do
not attempt to remove and
swallow the Caps.
Before attempting to move the CL35
digital piano, ensure that the Adjuster
is raised and clears the fl oor.
(*3) AC adapter
(*4) Binding
Side Panel ( Right )
Pedal Board
Adjuster
Floor
Screws ø4 x 14
Arm (M)
Screws (d)
M6 x 30
Caps (K/L)
front
back
(*1) Lock tab or
lever of the plug
Pedal Cord
(*2) Binding
Side Panel ( Left )