Multi-Timbral Mode On/Off - Kawai CL35 Owner's Manual

10) MULTI-TIMBRAL MODE ON/OFF

The procedure described in the MIDI CHANNEL SELECT section is used to transmit or receive data on only
one of the 16 MIDI channels (CH 1 - CH 16). However, by enabling MULTI-TIMBRAL MODE, MIDI data can be
received on more than one MIDI channel, simultaneously playing a different sound on each channel. With this
feature enabled, an external sequencer can be used to enjoy ensemble performances, playing multiple sound
types on a single CL35 digital piano.
The term 'Multi-Timbral' is derived from the ability to play multiple timbres simultaneously.
Please refer to the chart below for information regarding received program numbers and the corresponding sound
types.
Data received through CH 10 will not be performed when MULTI-TIMBRAL MODE is enabled.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press the key
assigned to the MULTI function.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the key '- (off)' to set
MULTI-TIMBRAL MODE to 'off', or the '+ (on)' key to set MULTI-TIMBRAL MODE to 'on'.
The MULTI-TIMBRAL MODE setting is automatically set to 'off' when the CL35 digital piano is turned on.
Program Change Number Mapping
Sound Name
CONCERT GRAND
CONCERT GRAND 2
STUDIO GRAND
MODERN PIANO
CLASSIC E.PIANO
MODERN E.PIANO
JAZZ ORGAN
CHURCH ORGAN
HARPSICHORD
VIBRAPHONE
STRING ENSEMBLE
SLOW STRINGS
CHOIR
NEW AGE PAD
ATMOSPHERE
Multi-Timbral mode ON
Program # Bank MSB
1 121
1 95
1 121
2 121
5 121
6 121
18 121
20 121
7 121
12 121
49 121
45 95
53 121
89 121
100 121
Multi-Timbral mode OFF
Bank LSB
0 1
16 2
1 3
0 4
0 5
0 6
0 7
0 8
0 9
0 10
0 11
1 12
0 13
0 14
0 15
Page
31
5