Tuning; Reverb - Kawai CL35 Owner's Manual

4) TUNING

The TUNING function allows the piano's pitch to be fi nely adjusted, and may prove useful when playing with other
instruments.
The factory default value is set to the modern standard A = 440.0 Hz and can be adjusted in 0.5 Hz increments.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously then press the key
assigned to the TUNING function.
A tuning tone will be played.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)' keys
to lower or raise the tuning pitch by 0.5 Hz, or enter the desired tuning pitch as a three digit number using
the number keys.
For example, to set the tuning pitch to A = 441.5 Hz, fi rst press the keys '4', '4', and '1', then press the '+ (on)' key.
Alternatively, fi rst press the keys '4', '4', and '2', then press the '- (off)' key.

5) REVERB

The REVERB function adds reverberation to the sound, simulating the acoustic environment of a recital room,
stage, or concert hall. There are three types of reverb available: Room, Stage and Hall.
The most suitable reverb setting is applied to each sound type automatically.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously then press the key
assigned to the REVERB function.
Step 2
While still holding down the METRONOME and SOUND SELECT
buttons, press one of the following keys to select the Reverb
type:
Key 1: ROOM
Key 2: STAGE
Key 3: HALL
The REVERB function is automatically activated when the CL35
digital piano is turned on.
Step 3
To turn on/off the REVERB function, press and hold the METRONOME and SOUND SELECT buttons
simultaneously, press the key assigned to the REVERB function, and then press the '+ (on)' or '- (off)'
key.
number keys
- +
1 2 3 4 5 6
off on
Reverb Off
Reverb On
Key 1: ROOM
Key 2: STAGE
Key 3: HALL
Page
27
5
7 8 9 0