Function Mode; Basic Operation - Kawai CL35 Owner's Manual

5. FUNCTION MODE

The Function Mode settings allow various advanced parameters of the CL35 digital piano to be adjusted.

1) BASIC OPERATION

Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press one of the 10
keys assigned to the desired function.
The LED indicators for the METRONOME and SOUND SELECT buttons will start to fl ash while the settings are being
adjusted.
If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be
used.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)' keys
to change the value for the selected function.
Hold down the both buttons
While holding down the METRONOME
and SOUND SELECT buttons, it is
possible to select other functions,
changing each value successively.
Step 3
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.
When the power is turned off, Function Mode settings will be reset to the factory default
values, shown below.
TOUCH
TRANSPOSE
TUNING
REVERB
DAMPER EFFECT
CONCERT MAGIC MODE
MIDI CHANNEL SELECT
MIDI LOCAL CONTROL ON/OFF
MULTI TIMBRAL MODE ON/OFF
TRANSMIT MIDI PROGRAM CHANGE
-
off on
Use the enclosed 'function label'
(page 8) for your convenience.
Function
Normal
0
A4=440.0Hz
On
2 (Normal)
Mode 1
1ch
On
Off
On
+
1 2 3 4 5 6 7 8 9 0
number keys
Default
1 2 3 4 5 6 7 8 9 10
MIDI settings
Page
25
5