Function Mode; Basic Operation - Kawai CL36 Owner's Manual

5. FUNCTION MODE

The Function Mode settings allow various advanced parameters of the CL36 digital piano to be adjusted.

1) BASIC OPERATION

 Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press one of the 10
keys assigned to the desired function.
The LED indicators for the METRONOME and SOUND SELECT buttons will start to fl ash while the settings are being
adjusted.
 If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be
used.
 Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)' keys
to change the value for the selected function.
The lowest key The lowest key
Hold down the both Hold down the both
buttons buttons
 While holding down the METRONOME and SOUND SELECT
buttons, it is possible to select other functions, changing each
value successively.
 Step 3
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.
 When the power is turned off, Function Mode settings will be reset to the factory default values, shown below.
TOUCH
TRANSPOSE
TUNING
REVERB
DAMPER EFFECT
CONCERT MAGIC MODE
MIDI CHANNEL SELECT
MIDI LOCAL CONTROL ON/OFF
MULTI TIMBRAL MODE ON/OFF
TRANSMIT MIDI PROGRAM CHANGE
number keys number keys
- - + +
1 1 2 2 3 3 4 4 5 5 6 6 7 7
off off on on
Use the enclosed 'function label' Use the enclosed 'function label'
(page 8) for your convenience. (page 8) for your convenience.
Function
Normal
0
A4=440.0Hz
On
2 (Normal)
Mode 1
1ch
On
Off
On
8 8 9 9 0 0
Default
MIDI settings MIDI settings
Page
25
5