Table of Contents
Advertisement
d. When camera function is started, CAM_D0 ~ CAM_D7 (CAM_Y0 ~ CAM_Y7) shall have
correct signals (high – >2.8V, low –> 0V) and R13 (CAM_MCLK), R112 (CAM_HS), R113
(CAM_VS) and R114 (CAM_PCLK) shall also have correct signals (high – >2.8V, low –> 0V).
e. The camera module is controlled through I2C interface. T56 (I2C_SCL, above channel #1) and
T57 (I2C_SDA, above channel #2) shall also have correct signals (high – >2.8V, low –> 0V).
GTC
■
Service Manual
Advertisement
Table of Contents
