Afc-Visa Fail; Edge Apc Fail - Asus P526 Service Manual

Repair lv3 4 sop

Hide thumbs Also See for P526:

Table of Contents

11.3 AFC-VISA fail

m. Do 2. AGC-Gmagic out of limit test first, from step a ~f.

n. If there is nothing wrong at the Rx trace, do 3. GSM APC fail procedure, from

step d ~ f.

a. While 8960 is used to do the 2G ATE23 RF function calibration, the calibration

program would do the GSMAPC calibration first. When the GSM APC calibration is

finished, the Edge APC will go on then. Besides, the Edge RF function works with the

same Tx trace as GSM function. Therefore, in the Edge Tx trace test, the only tests

should be done are the step d ~ f of the 3. GSM APC fail.

c. While 8820 is used to do the 2G ATE23 RF function calibration, the calibration

program would do the Edge APC calibration first. When the Edge APC calibration is

finished, the GSM APC will go on then. Besides, the Edge RF function works with

the same Tx trace as GSM function. Therefore, in the Edge Tx trace test, the only

tests should be done are the step d ~ f of the 3. GSM APC fail.

GTC

■

Service Manual

Table of Contents