Sony STR-DA5ES Operating Instructions Manual page 48

The SET UP button allows you to make the
following adjustments.
1 Press SET UP.
2 Press the cursor buttons (< or >) to
select the parameter you want to
adjust.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
6.1CH DECODING AUTO
MULTI CH 1 or 2 NONE
D.POWER
AUTO OFF
V.POWER AUTO OFF
SFIELD LINK ON
DECODE FORMAT AUTO
AUTO FUNCTION ON
2ND ROOM SP"
ON
3RD ROOM SP2' ON
2 WAY REMOTE3' ON
COMMAND MODE AVl
T.TONE NORMAL
OSD
COLOR
OSD H.POSITION 4
W 6.lch decoding mode (6.1CH
DECODING)
You can set this parameter using 6.1CH
DECODING on the front panel (page 34).
When set to "AUTO", the receiver performs
6.1 channel decoding only if 6.1 channel signals
decode flag is ON.
When set to "ON", the receiver performs
6.1 channel decoding only if the surround
signals are multi channel format [3/2], [3/2+1]
or [3/3], regardless of the 6.1 channel decode
flag.
When set to "OFF", the receiver does not
perform 6.1 channel decoding.
Tip
The 6.1 channel decoding flag is the information
recorded on the software (DVD, etc).
W Multi channel assignment
(MULTI CH 1 or 2)
Lets you assign a function to MULTI CH 1 or
2. You cannot assign TUNER or PHONO.
You cannot assign the same function to both
MULTI CH 1 and 2.
OSD V.POSITION 4
I) When the SPEAKER switch is set to "MAIN+2ND
ROOM" only. (STR-DA3ES only)
2) When the SPEAKER switch is set to "MAIN+3RD
ROOM" only. (STR-DASES only)
') STR-DASES only.
48