Sony STR-DA5ES Operating Instructions Manual page 13

CTRL S (STATUS) IN/OUT
CONTROL Al II
El
*
2ND Rd:OM OUT
': This jack is intended only for use in the manufacturing and servicing of the unit
CONTROL Al II hookup
l
If you have a CONTROL Al II compatible
Sony CD player, SACD player, tape
deck, or MD deck
Use a CONTROL A 1 cord (mini jack) (not
supplied) to connect the CONTROL A 1 II
jack on the CD player. SACD player, tape
deck, or MD deck to the CONTROL A I II
jack on the receiver. Refer to "CONTROL
A 1 I1 control system" on page 5 1 and the
operating instructions supplied with your CD
player, SACD player, tape deck, or MD deck
for details.
Note
If you make CONTROL Al II connection!, from
the receiver to an MD deck that is also connected
to a computer, do not operate the receiver while
using the "Sony MD Editor" software. Thiq may
cause a malfunction.
l
If you have a Sony CD changer with a
COMMAND MODE selector
If your CD changer's COMMAND MODE
selector can be set to CD 1, CD 2, or CD 3,
be sure to set the command mode to "CD 1"
and connect the changer to the CD jacks on
the receiver.
If, however, you have a Sony CD changer
with VIDEO OUT jacks, set the command
mode to "CD 2" and connect the changer to
the VIDEO 2 jacks on the receiver.
continued
13