To enter
a name
for SUB l-5
1 In step 5, move the easy scroll key to select
“Name”, then press the key to enter selection.
2 Use the easy scroll key to create a name (up to
8 characters).
+/-: select a character
6:
tnove the cursor
Insert: insert a space
Delete: delete a character
To cancel
learning
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
To erase
the learned
code
In step 5 above, move the easy scroll key to
select “Clear”, then press the key to enter the
selection. Again, move the easy scroll key to
select “Yes”, then press the key to enter the
selection. The number of buttons and the
capacity used for learning are displayed.
Tips
* The marks that are displayed in front of the button
name indicate the following
w : already learned
$ : pre-programmed
* In step 3, learned buttons can be selected directly. If
you press the button you want to use for the
Learned function, the list will jump to the same
button.
* The Learned function can be applied to the SUB
menus. SUB l-5 can be learned.
Notes
l
You can program up to 80 buttons for the Learned
function. However, in some cases, you may not be
able to program even if you have not programmed
80 buttons.
* If you select “IR SET” for a component that already
has a learned button setting, the learned codes for
that component are cleared. Furthermore, if the
cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to
“NO SET”.
Using
a command
that
has been
learned
When selecting a learned function, press the
button used to learn that function.