Spare Parts; Electrical Schematic; Accessories - Lincoln Electric 45 Operator's Manual

Spare Parts

Part List reading instructions

Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service
Department for any code number not listed.

Use the illustration of assembly page and the table below to determine where the part is located for your particular
code machine.

Use only the parts marked "X" in the column under the heading number called for in the assembly page (# indicate
a change in this printing).
First, read the Part List reading instructions above, then refer to the "Spare Part" manual supplied with the machine, that
contains a picture-descriptive part number cross-reference.

Electrical Schematic

Refer to the "Spare Part" manual supplied with the machine.

Accessories

K10349-PG-xM Source wire/feeder cable (gas). Available in 5, 10,15, 20, 25 or 30m.
K10349-PGW-xM Source wire/feeder cable (gas and water). Available in 5, 10,15, 20, 25 or 30m.
K10158 Plastic adaptor for 15-kg coils (delivered as standard).
K10343 Innershield torch adaptor.
KP14017-0.8
KP14017-1.0
KP14017-1.2
KP14017-1.6
KP14017-1.6R
KP14017-2.4R
KP14017-1.2A
KP14017-1.6A
English
Drive rolls and guide tubes 2 driven rolls
Solid wires:
0,6-0,8mm
0,8-1,0mm
1,0-1,2mm
1,2-1,6mm
Cored wires:
1.0-1.6mm
1.6-2.4mm
Aluminum wires:
1,0-1,2mm
1,2-1,6mm
12
12/05
English