Connections - Datalogic PowerScan D8530 Family Quick Reference Manual

DATALOGIC

CONNECTIONS

CONNECTING THE CABLE
Slip the cover over the cable.
Push the plastic boot into the
rubber gasket. Take care that the
tab on the plastic boot is aligned
with the notch in the rubber gasket.
Push the plastic boot and gasket
into the handle. Ensure that the
"Front" marking on the plastic boot
is facing out, with the arrow
pointing towards the front of the
scanner.
Insert the cable into the socket of
the plastic boot.
Insert the cable spacer into the
cable wire and slide it towards the
handle.
Push the cover along the cable
towards the reader, and hook it
over the yellow "tooth".
Insert the strain relief into the cover
and tighten the screw to fix the
whole assembly to the reader
handle.
4
A. Rubber gasket
B. Plastic boot
C. Cable spacer
D. Cover
E. Strain relief
Align
2
1
Arrow
3
5
4
6
Notch
Tab
7