Using Powerscan® D8530 Family - Datalogic PowerScan D8530 Family Quick Reference Manual

DATALOGIC
USING POWERSCAN® D8530 FAMILY
PowerScan® D8530 normally functions by capturing and decoding codes.
The PowerScan® D8530 reader uses an intelligent aiming system. By pulling
the trigger, the aiming system indicates a field of view, which should be
positioned over the code:
When you pull the trigger, a red beam illuminates the code. If the aiming system
is centered and the entire symbology is within the aiming system, you will get a
good read. The field of view changes size as you move the reader closer or
farther away from the code.
Linear barcode
Relative Size and Location of Aiming System Pattern
Successful reading is signaled by an audible tone plus a good-read green LED.
The PowerScan® D8530 hand-held reader aiming system is
designed for general reading and decoding of 1D and 2D symbols.
Some variation in reading distance will occur due to narrow bar
width and other factors.
NOTE
If reading codes positioned on reflective surfaces, it may be
necessary to tilt the reader with respect to the barcode and/or
set the Camera Control parameters. For configuring the Camera
Control parameters refer to the PowerScan® D8530 Reference
Manual available on the website and the CD-ROM.
NOTE
2
Aiming System
2D Matrix symbol