Datalogic PowerScan D8530 Family Quick Reference Manual page 10

DATALOGIC
START-UP
As with all USB devices, upon connection, the Host performs several checks by
communicating with the PowerScan® D8530™. During this phase the green
LED on the PowerScan® D8530™ reader blinks and normal operations are
suspended. The correct USB driver must be loaded before the PowerScan
D8530 is ready to read codes
For all systems, the correct USB driver for the default USB-KBD interface is
included in the Host Operating System and will either be loaded automatically or
will be suggested by the O.S. and should therefore be selected from the dialog
box (the first time only).
When configuring the USB-COM interface, the relevant files and drivers must be
installed from the USB Device Installation software, which can be downloaded
from the web site http://www.scanning.datalogic.com or can be found on the
CD-ROM.
The reader is ready.
6