Safety Instructions; General Setup - Motorola HDTV Quick Reference Manual

Welcome to High-Definition Service
Congratulations on receiving a new High-Definition Cable settop box from Mediacom.
You can now experience the ultimate in high-definition video and digital audio. Your HD
settop enables reception of both high-definition and standard-definition digital program-
ming as well as analog programming. Along with the settop box, you'll also receive an
Interactive Remote Control, which will be used along with your existing HDTV's remote
control to navigate and control your cable service. This Set-Up Guide introduces you to
the basic features of the settop box and provides several options for integrating it into
your current entertainment system.
Important Safety Instructions
Ventilate
The High-Definition settop box has been designed to operate reliably in a well-ventilat-
ed household environment. Slots and openings in the unit cabinet are provided for ven-
tilation. These openings should never be blocked by placing the product on a bed, sofa,
rug or similar surface. The unit should be positioned with at least 2 inches of space
above and on all sides.

Safety Instructions

1. Position the settop box with at least 2 inches of space above and on
all sides.
2. Do not block the slots and openings in the settop box.
3. Do not place anything on top of the settop box.
4. Do not position the settop box in an enclosed space that would restrict
airflow around the unit.
5. Do not position the settop box near any external heat source that could
raise the temperature around the unit.
1

General Setup

When the technician installs your HD settop box, the technician will set up your HDTV,
VCR and/or other devices as listed below. Be certain the technician enters this informa-
tion below, as it is necessary for switching from one device to another. If you are self-
installing the settop, use this list to enter the input source names as you complete each
connection.
Input Source List
Standard TV - Video Input:
HDTV - Video Input:
VCR - Video Input:
DVD - Video Input:
Video Input:
Video Input:
Getting Started
To begin using your HDTV service, power ON both the settop box and
your HDTV:
1. Using the Mediacom remote, power on the settop box by pressing the CABLE
button to set it in Cable mode, then the POWER button.
2. With the Mediacom remote, power on the HDTV by pressing the TV button,
then the POWER button; OR, using your HDTV Remote, follow your TV
manufacturer's instructions for turning on your HDTV.
NOTE: Not all TV's are compatible with the Mediacom remote
2