Pace DC700X Operator's Manual page 8

SAFETY INFORMATION (cont.)
Safety aspects of connections
Full details of the rear panel are on page 8.
Connecting
Do not connect your set-top (or any other equipment such
as a TV or VCR) to the power supply until you have properly
connected all the other cables.
Your set-top operates with a 120 V AC, 60 Hz power supply.
Do not connect your set-top to any supply other than this.
This set-top is equipped with a two-wire power cord, with a
polarized plug at one end. The other end of the cord is fitted with
a polarized connector, which is shaped such that it can be fitted
only one way into the power input jack of your set-top. Connect
this end first, before inserting the polarized plug into the wall
socket-outlet.
Disconnecting
Disconnect your set-top from the power supply before you
disconnect any other equipment from its rear panel.
The only way to disconnect your set-top from the power supply
is to remove the power cord from the wall socket-outlet. Your
set-top must therefore be installed near to the wall socket-outlet,
which should be easily accessible.
6
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WHEN SERVICING ONLY USE
IDENTICAL REPLACEMENT PARTS
CABLE IN
The CABLE IN connector is designed for
connection to a cable network only.
You must not connect any other equipment,
such as a VCR, to this input.
POWER INPUT
120V AC 60Hz
IR RECEIVE DOUBLE INSULATED
POWER INPUT
The model number, serial
number and electrical
rating of this set-top are
on a label on its base.