Pace DC700X Operator's Manual page 11

CABLE IN
Connect the cable service here.
TO TV Connect to the RF/antenna input on your TV or
VCR (optional).
VIDEO OUT
Connect to the composite video input on your
VCR (or a standard TV).
AUDIO OUT
Connect to the R and L audio inputs on your
stereo TV, stereo VCR or optional stereo amplifier.
SEPARABLE
Removal will interrupt your service.
SECURITY
MODULE
(behind cover)
COMPONENT If your HDTV does not have an HDMI
VIDEO below), connect your HDTV here.
S-VIDEO Connect to the S-video input (if present) on your
VCR or TV.
IR RECEIVE Connect to an optional remote "eye".
USB Connect to compatible optional equipment that
(Universal Serial supports a USB 2.0 interface.
Bus)
HDMI
TM
(High Definition
Multimedia
Interface)
ETHERNET
1394
SATA
DIGITAL AUDIO
OUT
POWER INPUT
(see
TM
REAR PANEL (cont.)
If your HDTV has an HDMI TM , connect it here
for a digital audio/video connection (instead of
using the AUDIO and 3 analog COMPONENT
VIDEO connectors).
Connect to an optional PC network.
Connect to 1394-compatible devices.
Connect to an optional external hard disk
(if enabled by your cable service-provider).
Connect to the optical digital audio input on
optional digital audio equipment.
Connect your set-top's power cord here.
9