Pace DC700X Operator's Manual page 37

Check
Can you see a picture on
your TV screen?
NO
YES
D
Please see the next page
Suggested solution
Your TV and other equipment may not be
turned on. Check that they are plugged into
R
AC power outlets and turned on.
SOLVING PROBLEMS (cont.)
Further checks, if there is still a problem
Check that you have selected the appropriate AV input on
your TV: HDMI TM , component video (YPbPr), composite
video or S-video (depending on how your system is
connected up).
If you are using a component video (YPbPr) connection,
make sure the set-top's TV Display Capability settings are
appropriate for your TV (see pages 22 to 24).
If the video path between your set-top and your TV loops
through other equipment (such as a VCR), you may need
to turn off this equipment for the loopthrough to work.
If you are using the HDMI connection, make sure the
TM
connection goes directly from your set-top to your TV. If
your set-top detects that the link is not secure, your set-
top will not transmit a picture (see page 11). If you expect
the link to be secure, try disconnecting and reconnecting
the HDMI TM cable.
35