EnGenius FreeStyl 1 User Manual page 8

7. Call Logs
a. Redial: Stores 10 phone numbers (up to 26 digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b. Received & New Call Log: Total 50 entries (16-digit phone number,
16-character names, and Date/Time stamp), needs Caller ID service
from local telephone company.
c. Phone numbers and names can be saved into phonebook while in
display.
8. Call barring
a. Block the users from dialing the long distance calls or international
calls
b. Up to 5 digits of each call barring setting; up to 5 entries allowed
c. If you need to dial a specific number to retrieve the dial tone, you
need to key in that number while setting the call barring
[Note] you need to key in the accurate user ID and password to perform
this feature. The default password is "0000"
9. Any Key Answer (except
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by "＊" to release it.
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold
b. Battery Hot Swap: Change battery while call is on hold.
13. Mute
a. Press MUTE (Left) soft key during talk, the handset microphone will
be muted.
Press UNMUTE (Left) soft key to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26
digits) and name (up to16 characters)
and SILENT Soft Key)
~15~
b. Alphabetically sorted display and search
c. Dial from display
d. During the stand-by mode, you can enter the phone book by
pressing scrolling key
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High)
b. Four key tone type selections
16. Call Timers
a. Display call time duration for current call during and immediately
after the call
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code
into FreeStyl 1 which is adjunct to the PBX system.
b. Up to 10 entries can be saved.
c. Once the feature code being programmed, you can quick perform
those functions during the call by pressing
18. PA On/Off
a. Enable or disable the broadcast function.
b. When PA is Off, the handset can't receive broadcast from base or
other registered handsets; But it can broadcast to base or other
registered handsets.
19. Menu Display
a. To avoid mis-setup in the "Call Settings"(MENU-4), "Phone Settings"
(MENU-5) and "Base Settings" (MENU-6), these settings can be
hidden.
b. Password is required before enter Menu Display (MENU-8), the
default password is "0000".
c. When enable the settings, these setting will not displayed any
longer, unless disable them by entering Menu Display again.
20. Group Setting
a. Allow handset to subscribe to one or several groups.
Re: Up to 9 groups can be subscribed.
21. Custom Name
a. Allow changing the "Welcome" screen to the desired wording or info,
such as the user's name.
Re: Up to 32 characters can be entered.
OPTION soft key.
~16~