Clarke International Limited, or one of our authorised dealers. Where possible any machine requiring attention should be returned to the dealer from whom it was purchased. Where this is not appropriate, please contact Clarke International, Service Department, Tel. 020 8988 7400 This guarantee does not affect your statutory rights.
✔ ✔ ✔ ✔ ✔ When using the chemical injection facility, use only the chemical cleaning agents (detergents), that are approved for power washers. CLARKE Traffic Film Remover or CLARKE Wash and WAX (available from your dealer), is recommended. FEATURES These fully portable machines incorporate a variable pressure control, together with a fan or jet spray, and may be used with or without a detergent.
ASSEMBLY and PREPARATION FOR USE. A - Pressure Regulator Knob B - Low Pressure Water Inlet C - High Pressure Water Outlet D - Presssure Gauge E - Unloader Valve F - Detergent Hose 1. Attach the handle to the frame, using the plastic screws supplied. 2.
N OTE: Use ONLY detergents designed for use with power washers. We recommend the use of CLARKE Traffic Film Remover, which is a powerful low foaming agent, for car cleaning, as well as other cleaning tasks.
CLARKE dealer for Service and repairs PARTS & SERVICE CONTACTS For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...
Need help?
Do you have a question about the Contractor PLS160YB and is the answer not in the manual?
Questions and answers