Page 2
Clarke International Limited, or one of our authorised service agents. Where possible any machine requiring attention should be returned to the dealer from whom it was purchased. Where this is not appropriate, please contact Clarke International, Service Department, Tel. 020 8556 4443.
Page 3
10. Do not attempt any repairs to this machine unless you are properly qualified. If you experience a problem, we suggest that you first contact your local dealer or otherwise Clarke International, Service Division (please see further details under Guarantee section).
Page 4
Using as short a length of hose as practicable, connect one end to the water inlet, using the hose adaptor supplied, then fill or prime the hose with water before placing the other end into the water supply. Take special care to see that no foreign matter is likely to be drawn up into the hose.
Page 5
permifted pressure of the machine. A large pressure control knob is fitted to the pump head. Under normal usage this will not require any adjustment. We strongly recomment that pressure adjustments are always made at the high pressure lance. as previously explained. Also do not make any adjustment to the engine in an attempt to create higher pressure, otherwise serious damage may occur.
Page 6
Sand for use with Sand Blasting Attachment ......7320005 SPARE PARTS AND SERVICE CONTACTS For Spare Parts and Service,please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...
Page 7
High Pressure Hose Handle Securing Nuts Top Handle Trigger Assembly Vario Nozzle Pressure Indicator High Pressure Outlet 10. Water Inlet Connection 11. Oil Sight Glass 12. Detergent (Chemical) Filter 13. Chemical Supply Hose 14. High Pressure Outlet Connection 15. Main Frame MODEL PART NO.
Need help?
Do you have a question about the PLS100FH and is the answer not in the manual?
Questions and answers