3.MAIN UNIT REPLACEMENT
2. Disconnect the PS Cable from CN1 connector of the PS Unit.
PS Cable
PS Unit
3. Replace the PS Unit with a new one, and reassemble in the reverse order of removal. When
reassembling, place the PS Cable into Notch (A) and Notch (B). Then, pass the Reactor cable through
Notch (C).
PS Cable
Notch (A)
PS Cable
Notch (B)
2- 4
PS Cable
Reactor Cable
EO18-33017
2.2 Replacing the PS Unit
CN1 connector
Notch (C)