Lenoxx Nostalgia CD117C Instruction Manual page 29

2.Press the PLAY( )button to start finalizing.
"
The display will show ---bUSY during finalize.
Wait until the busy disappear to complete the finalize.
The finalize time is subject to the contents of record,
it may take few minutes in some case.
When the operation has been finished,the NO TOC
indicator turns off and the display returns to the
track/time display.
During finalizing,no button works.
Never turn the power off nor unplug the power cord.
Although finalized CD-R discs may be blayed on ordinary
CD players,remember that finalized CD-RW disc may not
play on ordinary CD players.
Erase or Unfinalize a CD-RW
lt is possible to erase the last recorded track,it is also possible to erase a whole disc.
Erase procedures are possible only on an unfinalized CD-RW disc.If a CD-RW disc has
been finalized,unfinalize it prior to erasure.Remember that it is not possible to perform
any Erase or unfinalize procedures on a CD-R disc.
1.Press the CD button to select CD
CD
2.Load a recorded CD-RW.
3.Press the ERASE button in the stop mode.
ERASE
" "
(1).Wait until bUSY disappear on the display.
(2).Press the ( ) button to begin erase the last track.
(3).Repeat to press Erase button to continue the next track.
" "
Er and the last track number appear when the disc hasn`t been finalized.Each time the
ERASE button is pressed.the display changes as follows:
" "
Er and the number of the last track recorded on the disc
Select this to erase the last track on the disc.
This will not appear when only one track is recorded on the disc.
"
" "
26