Lenoxx Nostalgia CD117C Instruction Manual page 25

About CD-R and CD-RW discs
CD-R discs can be recorded once only.Once they have been used for recoding,they cannot
be erased or re-recorded, However, if space is available on the disc (and the disc has not
been finalized), additional material can be recorded.
By contrast,a CD-RW disc can be used in much the same way as a CD-R disc,but the last
track or tracks recorded can be erased,and the space on the disc can be re-used for other
recordings.
However,you should note that an audio CD created using a CD-RW disc may not play back
satisfactorily on every audio CD-player.
CD-R,by contrast,may be played satisfactorily on the majority of audio CD players.
Audio from the PHONO,TAPE,AUX in or line out can be recorded on the CD Recorder.
A. You have to wait for 20 minutes and then record when recording from AM/FM to
AUX/TAPE/PHONE;Press RECORD button,it works unstably if time is not enough.
At this time,press STOP button and then ROCORD button and PLAY button to record.
B.Press POWER button to restart the Unit if crash when recording.
C.You have to wait for the LCD to next track to record before pressing PAUSE/NEXT button
when recoring.
D.Pressing REC button can control the volume when
1.To record a record,select PHONO.
2.Record an external source,press the AUX button and connected the cable to the
AUX IN jacks at the back,Select AUX.
3.To record the cassette tape.
Press the TAPE button,load a Cassette Tape into the unit (located on side of the unit),
Press the RECORD button to record a tape.
4.Load a recordable CD-R or CD-RW disc into the unit.
RECORDING
recoring.
22