Lenoxx Nostalgia CD117C Instruction Manual page 23

3 Press the PROGRAM button
The track is programmed,and P-02 is display.
Repeat step 2 and 3 to program more tracks.
You can program up to 32 tracks.
To cancel the program mode,press the STOP button(
4.When the selection of track numbers has been finished ,press the PLAY button (
Start program playback.
To check the programmed order
In the stop mode,press the SKIP button re
that have been stored in memory.
To add a track to the end of the program
In the stop mode,press the PROGRAM button.
Select a track number by pressing the MUSIC SKIP button,and then press the
PROGRAM button.
The track is added to the end of the program.
To delete the last track from the program.
In this stop mode,press the CLEAR button
To clear the program
If one of the following buttons is pressed ,the progammed contents will be cleared:
OPEN/CLOSE,POWER,FM/AM,PHONO ,AUX, STOP in the stop mode
on remote con r t oI
" "
eatedl p to show the track numbers
on remote control
20
on remote control.
)
y
to delete the last track from the program.
)to