MAXSA 40330 Assembly & Operating Instructions

MAXSA 40330 Assembly & Operating Instructions

Energy-saving solar powered flood light
Hide thumbs Also See for 40330:

Advertisement

Model #: 40330
Perfect for flags, signs, gardens, driveways, carports, garages, entrance doors decks, porches,
or any large outdoor area where lighting is needed.
ASSEMBLY & OPERATING INSTRUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE
ABOUT YOUR SOLAR FLOOD LIGHT
Your MAXSA Solar Powered Flood Light converts sunlight into electricity during the day, enabling
the 12 LED lights to turn on automatically at night. With this light, walking into the dark will no
longer be a problem. You can also save the environment by conserving energy with these energy-
efficient solar powered LED lights.
Your Solar Powered Flood Light can light for up to 5 hours at full power and 10 hours at half power
/ brightness when the battery is fully charged. The 3 sealed rechargeable AA Ni-MH batteries
included with this product should last for 3-5 years before they need to be replaced.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 40330 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MAXSA 40330

  • Page 1 Model #: 40330 Perfect for flags, signs, gardens, driveways, carports, garages, entrance doors decks, porches, or any large outdoor area where lighting is needed. ASSEMBLY & OPERATING INSTRUCTIONS IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE ABOUT YOUR SOLAR FLOOD LIGHT Your MAXSA Solar Powered Flood Light converts sunlight into electricity during the day, enabling the 12 LED lights to turn on automatically at night.
  • Page 2: Included Parts

    INCLUDED PARTS: Carefully remove and identify all the parts from their protective packaging. 4 screws and 4 anchors for mounting the solar panel Solar panel angle pivot 9 foot power cable Solar panel Mounting bracket Solar panel mounting bracket ON/OFF Switch Brightness control switch Photosensor...
  • Page 3 MOUNTING TO A FLAGPOLE To mount on a flagpole, position the flagpole mounting bracket supplied against the flagpole and run the two supplied metal bands through the bracket as shown. *CAUTION: Do not tighten the metal bands until your Solar Flood Light is where you want it as they cannot be re-opened* Put the bracket up to the pole and close the metal bands around the pole, making sure the bands are pulled tight so the...
  • Page 4: Maintenance Tips

    Once you have identified all parts, connect the solar panel to your Solar Powered Flood Light by plugging the 9 foot cord into the cord attached to the bottom of the Solar Flood Light. Firmly turn and twist the cords while pressing together for a tight connection.
  • Page 5: Troubleshooting

    light on at dusk. For best performance, ensure that the Flood Light is not placed near night time light sources such as porch lighting and street lighting. TROUBLESHOOTING PROBLEM POSSIBLE SOLUTIONS • Ensure that the power button on the main body has been turned to the ON position.
  • Page 6: Year Limited Warranty

    1 year from date of original purchase. The obligation of the manufacturer, under this warranty, is limited to servicing and replacing defective parts when the unit is returned to MAXSA Innovations, freight pre-paid during the warranty period. To obtain warranty repair, the purchase receipt should be returned with the product.

Table of Contents