MAXSA 40220 Assembly & Operating Instructions

MOTION-ACTIVA TED
SECURITY LIGHT
ASSEMBLY & OPERATING INSTRUCTIONS
Solar Motion-Activated Security Light - 10W Halogen
Model #40220
o
IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE USE
ABOUT YOUR SOLAR SECURITY LIGHT
During the day, the solar cell charge panel included with this MAXSA
Solar Security Light converts sunlight into electricity recharging the pre-
installed battery. Using this stored energy, the 10 watt halogen light
(included in this Solar Security Light) turns on automatically at night when
motion is detected. This MAXSA Solar Security Light has an adjustable
TIME dial that allows light duration of up to 60 seconds. When the battery
is fully charged, this Solar Security Light can light up for up to 2.5 hours,
which is equivalent to 150 times when the TIME dial is set to the
maximum (+) position.
The battery included in this unit is a sealed lead-acid 6V, 4Ah
rechargeable battery and will need to be replaced when the charging
ability is decreased. This battery should last for approximately 3 years
before it will need to be replaced.