Table 2 Attributes Ethernet Electric Interface On The Front Panel Of Zxr10; 5952/5252/5928/5928-Ps/5228; Table 3 Indicators On The Panel Of Zxr59/52 Series Switch - Zte ZXR10 5900 Product Description

then PP will forward those packets as per their different MAC address and IP address.
All the ports support wire-speed processing, Table 2 below shows their attributes.
Table 2 Attributes Ethernet electric interface on the front panel of ZXR10

5952/5252/5928/5928-PS/5228

Port Type
10Base-T
100Base-TX
1000Base-T
There are some indicators corresponding to link status, operation alarm and power
supply on the front panel of ZXR10 59/52 series switch. The following tables show their
features.
Table 3 Indicators on the panel of ZXR59/52 series switch
Indicator
RUN
PWR
LNK/ACT
FDX
ZTE Confidential Proprietary
Description
Complying IEEE 802.3 standard
RJ45 connector
Using Unshielded Twisted Pair (UTP) Categories 3, 4 and 5
Maximum transmission distance of 185
Half-duplex/full duplex
MDI/MDIX
Complying IEEE 802.3u standard
RJ45 connector
Using Unshielded Twisted Pair (UTP) Categories 5
Maximum transmission distance of 100m
Half-duplex/full duplex
MDI/MDIX
Complying IEEE 802.3z standard
RJ45 connector
Using Unshielded Twisted Pair (UTP) Categories 5
Maximum transmission distance of 100m
Full duplex
MDI/MDIX
Features
Flashing: The main control board is working properly
OFF: The main control board malfunctions
ON: The main control board has no alarm
OFF: The main control board has alarm
ON: The interface has a link established
OFF: The interface has not any connection with other interfaces
Flashing: The interface is receiving/sending data
OFF: The interface is in half-duplex working condition
ON: The interface is in full-duplex working condition.
© 2010ZTE Corporation. All rights reserved.
ZXR10 5900 5200 Product Description
43